Spectracom Corp.
Rochester, NY 14623
Aug 13, 2008 Suited for ultra low latency computer architectures, TPRO-PCI-66U and TSAT-PCI-66U bus-level timing boards offer zero latency time reads of precise time stamps. Model TPRO-PCI-66U synchronizes to master clock through IRIG and other time codes, while TSAT-PCI-66U uses GPS satellite system to synchronize to coordinated universal time without need of any local source of official time. PCI-X compliant boards run at 66 MHz bus speed with 32-bit data interface.

Mitsubishi Digital Electronics America
Irvine, CA 92618
Aug 13, 2008 Built with video scaler that can smoothly display compressed WXGA (1,280 x 800) image, Model XD500U-ST has XGA-resolution of 1,024 x 768 pixels, and can be placed close to screen or white board. Delivering 2,000 lumens with 2,500:1 contrast ratio, it features DDP 2230 DMD chip with DLP® technology, BrilliantColor(TM), 6-segment color wheel (R, G, B, W, Y, C), and Color Enhancer2(TM) with dynamic intelligent lamp system that automatically adjusts light output.

Mitsubishi Digital Electronics America
Irvine, CA 92618
Aug 13, 2008 Suited for on-the-go presenters such as salespeople and teachers, Model XD530U XGA resolution (1,024 x 768 pixels) projector has center-lens design for symmetrical set-up. It includes Texas Instruments' DDP 2230 DMD chip with DLP® technology, and instant shut-down feature. Color wall support allows users to select surface color including beige, blue, green, pink, blackboard, or whiteboard setting, while DVI(TM) support enables users to project native digital signals in full HD resolution.

Sharp Electronics Corp.
Romeoville, IL 60446
Aug 12, 2008 Suited for commercial applications, Model LB-1085 108 in. class (93.9 x 52.9 in.) full HD 1080p LCD monitor provides 6.21 million pixels (1,920 x 1,080 x RGB) and TFT active-matrix drive system. It offers array of inputs, including HDMI(TM) and DVI-I connectors for connectivity with wide range of equipment and devices. Fanless design minimizes noise and intake of dust from outside air.

Sharp Electronics Corp.
Romeoville, IL 60446
Aug 12, 2008 Targeting ProAV market, Model XG-P560W .65 in. Installation/Integration projector combines 5,200 ANSI lumens of brightness with WXGA native resolution for detailed images and Texas Instruments® 3-chip DLP technology. With Sharp CV-IC II built-in video-processing chip, 1,800:1 contrast ratio, 7 interchangeable lenses, and redundant reliability through dual-lamp optical lighting system, projector is suited for large venues. Model XG-P560WN comes without lens.

Sharp Electronics Corp.
Romeoville, IL 60446
Aug 12, 2008 Suited for corporate and educational applications, DLP® Projectors feature 2,200:1 contrast ratio, front exhaust design, and 3x color wheel with 6 color segments. Models PG-F317X and PG-F312X provide 3,000 ANSI lumens, while PF-F262X and PG-F212X offer 2,600 and 2,300 ANSI lumens, respectively, for clear picture in any lighting condition. DVI input terminal enables noise-free images from digital sources and complies with HDCP to support digital video content in HD.

Sharp Electronics Corp.
Romeoville, IL 60446
Aug 12, 2008 Suited for facilities that need permanently installed display device, Model XG-P610X is .7 in., 3 chip professional projector that offers 2,000:1 contrast ratio, XGA native resolution for detailed images, 6 lens options, and redundant reliability through dual-lamp lighting system. It has built-in RJ-45 LAN connection and Web server that allows direct control from desktop to projector without special software, while built-in video-processing chip ensures image quality.

Asus Computer, Inc.
Newark, CA 94560
Aug 07, 2008 With EzLink 22 in. wide screen Model VW223B and 20.1 in. wide screen Model VW202B, users can transfer digital video signals from PC to one or more LCD monitors via USB 2.0 interface. ASUS Smart Contrast Ratio Technology adjusts luminance of backlight according to image contents and optimizes contrast ratio to 3000:1, while Aspect Control function allows users to choose between full and 4:3 modes without image distortion.

Dymax Corp.
Torrington, CT 06790
Aug 07, 2008 Suited for spot curing of coatings as well as adhesive bonding of polycarbonate, PVC, PET, metal, glass, and other substrates, BlueWave® LED generates light using array of surface mount LEDs instead of traditional metal halide or mercury bulbs. LEDs produce visible light energy in narrow wavelength band centered at 410 nm. System emits maximum visible-light intensity output of over 2,500 mW/cm² from 8 mm dia lightguide, and allows users to adjust intensity output from 0-100%.

Saelig Co., Inc.
Fairport, NY 14450
Aug 01, 2008 SolarLCD Modules combine solar panels, microcontrollers, low-voltage LC fluids, and hidden circuit board. Devices offer programmable, customizable message sequencing and do not require battery power. They can have up to 4 custom icons in positive or negative mode, with thickness options from 3 mm to less than 1 mm. Working indoors and outdoors, RoHS-compliant displays are rated for 50,000 hour life.

Advantech Automation Corp.
Cincinnati, OH 45240
Aug 01, 2008 With direct-VGA and DVI-D signal transmission, FPM-5151G includes on-screen display feature to adjust images on screen and front access USB connector that provides access to controller through USB extension cable. It offers lockable OSD keys with 2 user-defined contrast/brightness settings and 10-30 Vdc power input. Supporting panel, wall, desktop, rack, or VESA arm mounting, 15 in. unit has NEMA 4/IP65 compliant aluminum die-cast flat-sealed front panel with anti-rust chassis.

Custom Sensors & Technologies (CST)
Moorpark, CA 93021
Jul 31, 2008 Suited for manual lathe and milling machine applications, CE-certified DP900 DRO features graphical LCD-based display that can be specified with 2, 3, or 4 axes. Graphical dynamic tool position allows operator to observe tool movement on DRO in real-time, while integrated geometric calculations let operators establish datum points or take inspection readings when part is still on machine. Geometric reading can be captured with or without use of optional touch probe.

Chloride Systems
Burgaw, NC 28425
Jul 31, 2008 Designed to fit any architectural space, white LED edge-lit Caliber Signage offers computer-generated custom graphics and wording to match wayfinding or informational needs. Installation accommodates recessed ceiling, surface ceiling, surface end, and surface wall mount configurations. Panel is manufactured from high-impact acrylic with silk-screened computer-generated artwork. IC rated unit is listed to UL 48 standards, and meets damp location listing standard.

Del City
Milwaukee, WI 53209
Jul 28, 2008 Rated to meet SAE Class 1 vehicle requirements as well as SAE J845 specifications, LED directional lights feature 42 LEDs encased and securely sealed in epoxy material. Self-contained electronic control lets lights be wired directly to 12 V power switch, eliminating need for installation of driver compartment control box. Surface mount light can be installed on any flat surface, while grommet-mount versions can replace existing oval directional lamps.

Crestron Electronics, Inc.
Cresskill, NJ 07626
Jul 25, 2008 Combining built-in 2-series controller, amplifier, audio switcher, video switcher, mic mixer, and control interface, Model MPS-250 provides digital audio processing. Featuring QuickMedia(TM) (QM) input that integrates with Crestron MediaManager(TM), it distributes QM signal composite, S-video, or component video. All 4 MPS systems have gated mic inputs, balanced stereo audio, 12-band parametric equalization, dedicated touchpanel preview output, and native HD and high-resolution signal outputs.

Crestron Electronics, Inc.
Cresskill, NJ 07626
Jul 25, 2008 Model TPS-6X is 6 in. wired Cresnet or Ethernet connected touchpanel with full-motion video display while docked and automatically functions as wireless RF device when undocked. It features long-range, high-speed 2-way RF communication up to 200 ft and 1-way IR, and comes with both pre-engraved backlit button bezel and blank bezel. Unit simultaneously remains connected to RF radio while operating as wired panel, and operates within IEEE 802.15.4.

Electro-Matic Products, Inc.
Farmington Hills, MI 48335
Jul 21, 2008 Offering flexibility in creating electronic messages, Model 4U2SEE utilizes LEDs for red, green, and amber colors with average lifetime rating of 60,000 hours. Sign can display either 2 lines of 5.5 in. characters or one line of 12.5 in. characters. In addition to standard RS232 or RS485 communication options, display includes Ethernet port. Full time of day and calendar feature enables scheduling messages or showing time and date on display.

Metronics, Inc.
Bedford, NH 03110 6818
Jul 18, 2008 Quadra-Chek 330 (QC-330) includes Measure Magic® technology that automatically determines feature type based on probed points. Compatible with virtually any manual CMM, it includes USB port for flash drives and printers as well as RS-232 port for communication to any computer. With high-resolution LCD monitor for 3D measurements display and operator control, QC-330 can record measurement activities and store them as a program to streamline difficult and repetitive measurements.

Ametek Chatillon, Test & Calibration Instruments Div.
Largo, FL 33773
Jul 18, 2008 Sealed to IP67 specifications both front and rear, CAN-Communicator (C-COM) 2 in. gauge can be used by itself or with existing instrumentation by connecting it to SAE J1939 (CAN) data bus. Able to display data directly from vehicle data bus or text and graphics as specified by customer, it has 106 x 56 pixels backlit LCD, dead-fronted warning indicator, and 3 backlit switches. Switch-to-ground output can be used to control external annunciator, relay, or other device.

Texas Instruments, Inc. (TI)
Dallas, TX 75243-4136
Jul 14, 2008 With 16-bit (65,536 steps) grayscale control with spectrum PWM, TLC5943 16-channel, 50 mA constant-current sink LED driver improves image quality and reduces flicker noise in monochrome, multicolor, and full-color LED displays, as well as LED signboards and display backlighting. It features 7-bit (128 steps) global brightness control for all channels with sink current, 30 MHz data transfer rate, 3.0-5.5 V VCC, and ±1.5% channel-to-channel and ±3% device-to-device constant current accuracy.