Bodine Electric Co.
Chicago, IL 60618 4798
Jul 03, 2008 Operating from single-phase 115 or 208/230 Vac line voltage, Pacesetter(TM) 2994 and 2998 ac motor speed controls can drive 230 Vac, 50 or 60 Hz, inverter-duty, 3-phase gearmotors and motors ranging from 1/8 to 1 hp. Model 2994 features multifunction keypad, 4-digit LED display, 6 LED indicators, on/off switch, and speed potentiometer. Housed in NEMA-1/IP40 enclosure for basic environmental protection, Model 2998 is UL and CE certified with built-in RFI (EMI) filter.

Omega Engineering, Inc.
Stamford, CT 06907
Jul 02, 2008 Featuring universal input, single relay output, digital input for remote reset, timer, and register, CN6221 Series can be configured as high or low limit controller. Targeting water, chemical, plastics, automotive, and food processing industries, 1/16 DIN limit controller is suited for situations where high/low limit shutdown or alarm is required for general temperature control. Optional features include multi-function 2 alarm outputs, retransmission output, and RS485 communications.

Sprint Electric Ltd
Arundel East Susse BN18 0BE  United Kingdom
Jul 02, 2008 Offered with both 2 and 4 Quadrant options, PL/X range of 12-1,050 A digital dc drives include 40 character alphanumeric backlit displays, range of software blocks, and fully controlled field for extended speed range. They offer range of communications that support motor control applications. Compact units are UL, cUL, and CE approved.

Omron Scientific Technologies Inc.
Fremont, CA 94555
Jul 01, 2008 Offered in EPDM for resistance to ozone and weathering, Model SGE-88 mounts with double-sided tape, while Model SGE-1510 mounts with integrated angle on profile. Units are protected from damage by outer covering of non-conductive rubber that allows actuation angles up to 90°. If moving part with safety edge strikes operator, or vice versa, safety edge is depressed and will send signal to power source to stop. Applications include gates, doors, machines, automatic mixers, and scissor lifts.

Beckhoff Automation LLC
Minneapolis, MN 55337
Jul 01, 2008 Suitable for drives with quadratic load characteristics such as fans and pumps, Model KL2791 Bus Terminal I/O system enables direct connection of small, 1 A, single-phase motors rated 120 V, 60 Hz, in order to achieve setting range for flow rate from 10-100%. Set value for motor speed is specified by 16-bit value, and motor is switched on and off with mains synchronous pattern. Compact speed controller comes in standard bus terminal housing with width of 12 mm.

Atmel Corp.
San Jose, CA 95131
Jul 01, 2008 Compatible with 5 V input supply, AT73C237 Power Management Unit (PMU) generates 4 regulated output voltages with programmable output voltage selection and output current up to 70 mA. Three LDO regulators provide programmable voltage from 1.2-2.75 V required by RF and analog devices, while one 1.8 V regulator is for backup battery/capacitor recharging. Integrated 2-wire interface allows any MCU to program variable LDO output voltages and manage the enable of each LDO.

Strippit Inc.
Akron, NY 14001-1321
Jun 30, 2008 Used on PPEB and Easy-Form series press brakes, CADMAN® Touch combines CNC technology and IR touch screen programming system running on Windows® XP embedded PC-based control unit. It works with LVD integrated intelligent bending database and on-board LVD CADMAN-B 3D (bending) software, creating and storing interactive integrated databases for bend allowance, angle corrections, and spring-back. GUI minimizes control input, lessening steps between drawing to completed part.

Honeywell, Inc., Industrial Automation & Control
Phoenix, AZ 85023
Jun 30, 2008 Experion® allows plant operators to coordinate process control, safety shutdown, as well as fire and gas mitigation steps. In addition to the safety instrumented system integration, this Process Knowledge System helps improve plant operations via embedded simulation capabilities used for operator training and control, display, and procedure validation. It also offers integrated batch functionality to optimize production, as well as reliability for chemical and life sciences companies.

Honeywell, Inc., Industrial Automation & Control
Phoenix, AZ 85023
Jun 30, 2008 Integrated with Process Knowledge System, Safety Manager allows safety and process controllers to communicate with each other without depending on intermediate interfaces or compromising operations security. In sharing information between Safety Manager and Experion C300 process controller, system can provide plant-wide safety instrumented system point data, diagnostics, alarms and events, operator displays, and sequence of event information to any Experion station located in plant.

Micrel Semiconductor Inc.
San Jose, CA 95131
Jun 30, 2008 Including Models MIC69301/2, MIC69151/3, and MIC69101/3 with current ratings of 3, 1.5, and 1 A, respectively, MIC6910x/15x/30x low voltage linear regulators feature single supply operation from 5.5 V down to 1.65 V with ±1% initial output accuracy. ICs have thermal shutdown, current limit, and power handling capabilities. Aimed at industrial, medical, communications, computing, and consumer markets, devices come in thermally-enhanced e-Pad SO-8, MLF®, and S-PAK packages.

L.U.I. PLUS
Jasper, IN 47546
Jun 27, 2008 Available in lever (ADA approved) and knob styles, Biometric locking system delivers functionality based solely on thermal imaging of user's fingerprint to eliminate concerns over forgotten, lost, or stolen keys. Product can also be set to unlocked mode during times when open access is desired. Suited for commercial buildings, system offers administration and audit control capabilities as well as built-in LCD that facilitates enrollment/deletion of up to 1,000 users.

Chil Semiconductor Corp
Tewksbury, MA 01876
Jun 27, 2008 Supporting Intel VR11.x designs that deliver up to 150 A, CHL8100 digital mixed-signal, multiphase, synchronous buck controller can be used with CHL8500 high-frequency dual MOSFET gate driver. Designers can digitally configure switching frequency of each phase from 200 kHz up to 1 MHz. Power Designer GUI can be used to access, set, modify, and monitor parameters, which are stored in embedded nonvolatile memory. Controller uses current balancing algorithm for thermal management.

Mettler Toledo, Inc.
Columbus, OH 43240
Jun 26, 2008 Used to weigh random weight packages as they pass over scale conveyor, IND560dyn EXPRESSWEIGH® Scale Terminal features configurable output that can include avg weight, consecutive number, time and date, package ID, and package dimensions. IND9D56 EXPRESSWEIGH® controller offers connections for photo-eyes and other I/O devices to create complete solution. Both provide 3-zone checkweighing for up to 25 target IDs. Graphical display shows comparison between package's weight and target value.

Zilog, Inc.
San Jose, CA 95126
Jun 26, 2008 EMV and PCI PED pre-certified for POS applications, Zatara(TM) ZA9L1 ARM 9(TM) core-based application-specific standard product (ASSP) suits security-critical applications such as payment, identity, healthcare, access control, e-government, and e-administration. It incorporates 32-bit RISC SoC and on-chip dual-role USB OTG controller and is secured against tampering and other attacks. Other features include Magnetic Card Reader, SmartCard and LCD monochrome controllers, and 76 GPIO.

Linear Corp.
Carlsbad, CA 92009
Jun 26, 2008 Designed for multipoint gate and door entry systems, ACT-31D (single-button) and ACT-34D (4-button) TRANS PROX(TM) radio transmitter and Wiegand access control enable users to carry one product on key-ring to enter buildings through multiple entry points. Radio control transmitter is compatible with Linear telephone entry systems, multi-door access controllers, and gate receivers, while proximity access is compatible with Linear's AM-PR proximity reader in 26-bit Wiegand format.

Copley Controls Corp.
Canton, MA 02021
Jun 25, 2008 Accelnet-Micro servo drive, mounted directly onto OEM circuit boards, works in range of system architectures and is compatible with various feedback devices. Along with built-in camming and electronic gearing capability, product offers several standard command interfaces. Drive exploits Copley Virtual Machine capability in stand-alone mode, enabling it to function as system controller. Solution delivers 6 A peak @ 90 V for brushless and brush-type servo motors.

Steinmeyer Inc.
Bedford, MA 01730
Jun 25, 2008 Utilizing mechanical cross roller bearings for decoupling of ball screw drives, PMT 160 series stages achieve straightness and flatness runout of 50 nm or less. Decoupling system isolates any transverse movement of ball screw from linear bearing system and saddle of stage. Stages offer travel from 50-300 mm, with standard positioning accuracy of less than 10 µm and repeatability of ±0.5 µm when driven by dc servomotor or dc stepper motor.

Summit Microelectronics, Inc.
Campbell, CA 95008
Jun 24, 2008 Operating at switching frequency of 1 MHz, Model SMB119 incorporates 3 synchronous step-down converters, 2 step-up converters, 1 configurable step-up or step-down converter, 1 low-dropout linear regulator, and fully programmable system supervisor that monitors all channels for under- and over-voltage events. It provides digital power management via I2C interface and non-volatile memory. IC operates directly from +2.7-6.0 V input over 0-70°C or -40 to +85°C temperature ranges.

Millennial Net, Inc.
Burlington, MA 01803
Jun 24, 2008 Retrofitting to existing infrastructures, MeshScape® 6424 Wi-Stat II wirelessly integrates multiple sensors and control actuators to optimize energy consumption and comfort within each zone in commercial and industrial HVAC environments. It utilizes 802.15.4 unlicensed radio band and operates bi-directionally within wireless sensor network for intelligent control action. Connecting to existing HVAC wires for power, system replaces existing analog, digital, and/or pneumatic thermostat.

GE Sensing
Billerica, MA 01821
Jun 24, 2008 Suited for rack-mount or bench-top applications, PACE 5000 combines full digital control and piezo-resistive devices to optimize precision, measurement stability, performance, and slew rate. Touch-screen and hi-res ¼ VGA display with icon menu facilitate operation as well as setup, while connectivity is provided via RS232 and IEEE communication ports. Multiple units can be combined in same system to provide pressure calibration capability from 25 mbar to 210 bar.