Midwest Tool & Cutlery Co.
Sturgis, MI 49091
Apr 28, 2004 Made of hot drop-forged moly alloy steel, Seamer Tongs feature cushioned grips that allow users to bend and form metals as well as grip and hold metal sections or panels being joined. Models, with one-piece, straight or curved handles, have 3 in. wide blades and throat capacity of 1 1/8 in. Dual blades have raised ribs in ¼ in. increments on outer surfaces for positioning of tongs, and overall tool length is 9½ in.

Garon Products, Inc.
Wall, NJ 07719 1924
Apr 22, 2004 Joint Guardâ„¢ fills expansion joints with flexible epoxy seal that will not become brittle or break out as sections of floor expand and contract in response to temperature changes. With 100% solids formula, product flexes up to 50% and withstands heavy traffic and chemical contact. Pourable, self-leveling, self-priming, non-shrink sealant prevents contaminants from pooling in joint areas.

Loegering Manufacturing Inc.
Casselton, ND 58012
Mar 24, 2004 Forward-digging, skid-steer-mounted trencher can dig in both directions, straight, and in curves. Skid-plate sets in relation to 2 tandem dirt augers and rests on ground, allowing operator to skid-steer in float position and maintain constant digging depth. It is available in digging depths of 3 ft 6 in., 4 ft 6 in., and 5 ft 6 in. and can dig trenches 5–12 in. wide. Trencher can convert to a different size by adding boom extension piece and additional section of chain.

Caterpillar, Inc.
Peoria, IL 61629
Mar 23, 2004 Models CB-214E, CB-224E, and CB-225E are powered by 3-cylinder 3013C diesel engines that provide 32.7 hp and operate at 2,800 rpm. Double-drum Model CB-214E offers 39 in. compaction width and is suited for maintaining streets, roads, and alleys. Featuring compaction width of 47 in., double-drum Model CB-224E handles tons-per-day production rate. Model CB-225E has 47 in. wide drum at front and 4 smooth tires in rear, providing benefits of vibratory and pneumatic compactor.

Loegering Manufacturing Inc.
Casselton, ND 58012
Mar 23, 2004 Demo-Dozer combines capabilities of different buckets into one attachment. Unit is available in overall widths of 61, 67, 73, 79, and 85 in. with open height of 33.4 in. and overall length of 34.9 in. It includes recessed grease zerks, cylinder and hose covers, predrilled base edge, quick couplers, connection hoses, removable side plates, and 2 outside access steps. It is suited for concrete and asphalt removal, demolition, and sod and vegetation removal.

Caterpillar, Inc.
Peoria, IL 61629
Feb 18, 2004 With operating weights from 11.8–14.0 ton, CS-533E and CP-533E feature dual-pump arrangement that provides required pressure and flow to drum-drive motor and wheel-drive motor independently, resulting in max torque and full time tractive power to drive motors. Rear axle incorporates limited-slip differential that provides continuous power in soft or slippery conditions. Smooth-drum CS-533E compacts granular and semi-cohesive soils, while padfoot-drum CP-533E compacts cohesive soils.

Paul Wever Construction Equipment Co., Inc.
Goodfield, IL 61742-0085
Feb 09, 2004 Snowbox, V-plow, Wing Plow, and Angle Plow can be easily interchanged. Three-point hitches allow for hook up to almost any vehicle or tractor. Depending on requirement, end user can use attachments independently or in combination with each other. No major modifications are needed to attach CCA Wing or Snowbox. As snow gets deeper, design allows operator to change plow from pickup to backhoe in 5 minutes.

Orion Fittings, Inc.
Kansas City, KS 66117
Feb 04, 2004 Electrofusion joining system joins polyvinylidene fluoride acid waste pipe and fittings from 1½â€“6 in. using Rionfuse electrofusion processor built into shock-resistant, splash-proof case. System utilizes fusion coil made from heavy-duty stainless steel coil wire which can be rotated 360° in socket to aid in installation. Able to be interfaced with PC, product ensures leak-free joints and has internal memory that keeps track of date and weld number.

MagneTek, Inc.
Nashville, TN 37214 4602
Feb 03, 2004 Hoist drives employ software that allows up to 7 slave VFD motors to be synchronized to master encoder signal using Electromotive Systems IMPULSE® Series 2 VFD. Master IMPULSE® drive provides pulse reference to slave encoder that commands motor's speed. Slave IMPULSE® drives monitor pulse feedback from master and slave encoders and compensate for position errors, resulting in correct alignment between the system master motor and the slave motor.

Garon Products, Inc.
Wall, NJ 07719 1924
Jan 26, 2004 Hy-Speed 500â„¢ emergency repair cement becomes a concrete-hard mass ready for traffic in 1 hr. It expands as it sets, becoming permanent patch that exhibits 3x strength of concrete. Product requires users to add water, mix, then pour. It needs no priming, leveling, or troweling and comes in 5 gal pails.

Vestil Manufacturing Co.
Angola, IN 46703-0507
Jan 22, 2004 Dual Door Work Platform provides access from both sides with inside-swinging, self-closure gates. Door openings are 16½ in. Unit attaches to fork truck by inserting forks into rear fork tubes of platform, and is secured to mast with 36 in. chain and tine lock. Made of welded steel with blue powder coat finish, platform includes 2 fall prevention harness anchor points and posted tri-lingual instruction sign. No assembly is required.

Caterpillar, Inc.
Peoria, IL 61629
Dec 29, 2003 IT38G Series II and IT62G Series II Integrated Toolcarriers are equipped with parallel lift linkages and integral quick couplers to handle material handling and digging tasks. Wheel loader-based machines feature electronically controlled engines that aid in fuel efficiency and reduce emissions. They also employ variable shift control, instrument cluster, machine health monitoring system, and cooling system with on-demand fan. Horsepower ratings range from 160–204 net hp.

Devcon
Danvers, MA 01923
Dec 29, 2003 Resistant to chemicals and abrasion, heavy-duty Ultra Quartz(TM) is trowelable to smooth, nonporous finish and attains compression strength of 9,000 psi. It offers protection against acids, alkalis, water, oils, solvents, and other industrial chemicals. Product can be built up to 1 in. thick on damaged or pitted concrete floors and will not sag, drip, or run. This 100% solids, silica-filled epoxy putty cures at room temperature within 16 hr.

Caterpillar, Inc.
Peoria, IL 61629
Dec 22, 2003 Models 120H, 135H and 12H offer power ranges of 125–140, 135–155, and 145–155 net hp, respectively. Variable Horsepower and VHP Plus provide precise delivery of power as system adjusts according to gear selection. Hydraulically driven, variable speed cooling fan operates on demand. Electronic Monitoring System III keeps operator informed and helps protect machine from damage. Standard blade width for all three is 12 ft and moldboard height is 24 in.

Caterpillar, Inc.
Peoria, IL 61629
Dec 18, 2003 Models 621G, 627G, 631G, and 637G offer operator stations that promote efficient operation, low-profile scraper bowl, and EMS III electronic monitoring system. Electronically controlled engines feature Caterpillar HEUIâ„¢ fuel system and comply with current EPA emissions regulations. Other features include automatic planetary powershift transmission, single lever implement control, bulldozer ejection system, and grouped maintenance and service points.

Caterpillar, Inc.
Peoria, IL 61629
Dec 15, 2003 Turbocharged engines of earthmoving Caterpillar D3G, D4G, and D5G Tractors meet EPA Tier 2 and CE Stage II emission norms. Power outputs of Models D5G, D4G, and D3G are 90 hp, 80 hp, and 70 hp, respectively. Product Link system, with GPS technology, provides up-to-date information on machine location, hours, and health. Machine-monitoring package alerts operator of machine conditions without need for visual monitoring. Single joystick controls speed, direction, and steering.

Caterpillar, Inc.
Peoria, IL 61629
Dec 12, 2003 Models M313C and M315C feature Cat® 3054E ATAAC engine, high-efficiency hydraulics, heavy-duty undercarriage, and ergonomic operator station. Model 115 hp M313C has operating weight of 28,800–32,520 lb, while 121 hp M315C has operating weight of 33,070–36,710 lb. Max reach is 29 ft 2 in. and 30 ft 4 in. for M313C and M315C respectively. Both units are offered with 1-piece and Variable Adjustable (VA) boom options as well as 2 stick options.

Star Industries
Fort Worth, TX 76117 1706
Dec 11, 2003 Load-N-Tow provides way to load and unload small, but heavy and awkward equipment. Front gate folds down to form ramp, and when ramp is raised, load is secure for transportation. Two in. sq trailer adapter receiver provides secure way to move trailer-mounted equipment, and hook point is provided for handling suspended loads. Load-N-Tow slides on forks and is secured with safety chain. Platform sizes include 42 x 42, 42 x 48, and 48 x 48 in.

SWF Machinery
Sanger, CA 93657
Dec 04, 2003 Compact PL 200 offers vertical packing of bagged packages into bliss, tray, or RSC style cases and trays at speeds up to 150 units/min. It accommodates infeed product settler/conveyor, which gently vibrates product to provide even, uniform bag prior to loading. Features include polycarbonate interlocked guarding package, PLC controls, case discharge pusher, empty case holder, and touch screen operator interface.

Dressta North America
Buffalo Grove, IL 60089
Nov 20, 2003 Landfill Arrangement Crawler Dozers incorporate turbocharged engines and 3-speed countershaft powershift transmissions. Dual-speed geared type steering drives deliver full power to both tracks while turning and provide control over large, uneven blade loads. Models TD-25H LA (320 hp), TD-20H LA (225 hp), and TD-15H LA (175 hp) have modular double reduction final drives and 2-door, hexagonally shaped, pressurized cabs.