Komatsu America Corp.
Rolling Meadows, IL 60008
Jul 03, 2008 Models D37EX-22 and D37PX-22 are outfitted with 3.26 L, EPA Tier 3 emissions certified SAAD95LE-5 engine. Delivering 89 hp at 2,200 rpm, they have operating weight range of 17,394-19,070 lb, depending on machine version. With 88 in. of track on ground, both standard (EX) and low ground pressure (PX) models offer weight distribution and flotation options to match specific application. D37-22 dozers employ power angle tilt blade with a capacity of 2.32-2.55 yd³.

Compaction America, Inc.
Kewanee, IL 61443 1714
Jul 02, 2008 Suited for work on granular, cohesive, and mixed soils, models BPR35/60 and BPR35/60D are respectively powered by fully enclosed 5.4 hp Honda air-cooled gas engine and 4.16 hp Hatz air-cooled diesel engine. Vibratory exciter design lends to working speed capabilities, as well as gradeability, on all types of soil. Both models have max vibration frequency of 4,800 vibrations/min and heavy-duty, wear-resistant base plates with reinforced edges and working width of 23.6 in.

Compaction America, Inc.
Kewanee, IL 61443 1714
Jul 02, 2008 Weighing 20,500 lb, self-propelled BF6615 employs crawler-style track drive system undercarriage and can push asphalt feeder trucks while maintaining working speeds up to 180 fpm. Features include 9 ton hopper capacity; turbocharged, 99 hp Cummins water-cooled diesel engine with fuel-saving and noise-reducing ECO-mode; and load-sensing hydraulic system. Dual vibrators provide 2,500 vibrations/min, and UNIMAT 2 electrically heated full-width floating screed has 8-15 ft paving width.

Compaction America, Inc.
Kewanee, IL 61443 1714
Jul 02, 2008 Featuring vertically opening hoods, 13-ton single-drum BW213-40 Series comprises smooth drum Models BW213D-40 and BW213DH-40 as well as BW213PDH-40 padfoot roller. Model BW213D-40 is powered by 133 hp Deutz water-cooled diesel engine, while Models BW213DH-40 and BW213PDH-40 are powered by 160 hp Cummins diesel engines. All deliver frequencies of 1,800 and 2,160 vibrations per minute, while each generates 61,825 lb of centrifugal force in high amplitude and 44,550 lb in low amplitude.

Compaction America, Inc.
Kewanee, IL 61443 1714
Jul 02, 2008 Model MPH125 is powered by turbocharged, 590 hp, Tier 3-compliant Deutz V8 diesel engine, equipped with electronic injection system, that drives 91.7 in. wide rotor. Rotor speeds from 90-130 rpm can be selected under load, and rotor's mixing chamber automatically adjusts with cutting depth. Operator station rises for normal operation and lowers to reduce overall transport height to 122 in., while articulated frame plus rear-wheel steering result in inside turning radius of 148 in.

Compaction America, Inc.
Kewanee, IL 61443 1714
Jul 01, 2008 Measuring less than 16 in. wide, BPR25/40 series is optimized for maneuverability and centrifugal force. Honda 5.36 hp air-cooled gas engine powers BPR25/40, while Hatz 4.15 hp air-cooled diesel engine powers BPR25/40D. Featuring max frequency of 5,100 vibrations/min, both are suited for work on granular material as well as cohesive and mixed soils in landscaping, site prep, and other mid-size applications. Features include vibratory exciter design and nodular cast iron base plate.

Compaction America, Inc.
Kewanee, IL 61443 1714
Jul 01, 2008 Featuring one 47 in. drum, BW124DH-40 smooth drum roller and BW124PDH-40 padfoot roller are powered by Tier 3 Deutz diesel engine and offer all-around visibility. Centrifugal force and amplitude are optimized for compacting granular and mixed soils as well as semi-cohesive and cohesive materials. While no-spin rear differentials and standard drum drive achieve optimal gradeability, bolt-on articulation joint optimizes maneuverability and drum contact on irregular terrain.

Genie Industries, Inc.
Redmond, WA 98073 9730
Jun 20, 2008 Redesigned to meet ANSI A92.3 standards, Super-Straddle(TM) Accessory provides up and over access for Genie® AWP(TM) Super Series personnel lifts to be used in spaces that are otherwise inaccessible. Unit weighs 580 lb and provides up to 4 ft of vertical clearance from ground. End frames adjust for leveling on floors with slopes up to 6°. Display lights on lift's ground control panel will notify operators when Super-Straddle(TM) is set up correctly and ready to operate.

Huron Technologies, Inc.
Leslie, MI 49251
Jun 19, 2008 Used in making concrete parts, Release Coating 7572 is formulated to adhere to metal mold surfaces and resist being removed (except with significant abrasion). Blended product contains liquid lubricants derived from renewable plant sources as well as petroleum-based oils. Release is improved as more of lubricant tends to stay behind, and agent can reduce size and quantity of bug holes that occur on surface when used with concrete and similar products.

Symons
Elk Grove Village, IL 60007
Jun 18, 2008 Able to adapt to any tread and riser dimension, with no limit to number of steps, Concrete Step Wizard® facilitates process of forming concrete stairs with lumber. Rise and run of steps are determined using change in elevation, step locations are marked on stringer boards (~36 in. spacing), and Concrete Step Wizard is suspended from each mark. Riser boards, ripped across bottom edge (45° angle) for facilitated finishing, are attached to each Concrete Step Wizard to form step.

Light Fabrications, Inc.
Rochester, NY 14606
Jun 05, 2008 Designed to eliminate need for sandwich patching, LF311 printable hole patch features protective, adhesive-free center that eliminates adhesive exposure and contamination through backside of paper web. This 3.5 x 7 in. product, constructed from 2.2 mil 3M Repulpable tape, has ¾ in. adhesive perimeter and oval shape to reduce edge shock. After application, there is no transfer of impressions or glue to next layer of paper in roll.

Konecranes Americas, Inc.
Springfield, OH 45502
Jun 05, 2008 Designed to meet needs of industrial crane systems, DynA solutions offer continuous speed control that increases safety through reduced risk of load damage and minimized load swing. UI increases productivity by facilitating installation and start-up, while torque and brake control management uses inverter and vector control technology to promote reliability. While DynAC Vector and DynAHoist Vector suit traveling and hoisting applications, DynADrive suits traveling applications only.

CertainTeed Corp.
Valley Forge, PA 19482-0860
May 16, 2008 CertaSpray(TM) Foam Insulation sticks to surfaces, creates air seal, and can be used in whole house and building applications or in combination with fiber glass insulation, particularly in hard to reach areas such as cathedral ceilings, knee walls, and roof decks. By reducing air leakage, polyurethane spray foam minimizes hot and cold spots and maintains indoor air quality by impeding penetration of moisture and outdoor allergens.

Cathedral Stone Company, Inc.
Hanover, MD 21076
May 14, 2008 Compliant with all VOC regulations issued by US cities and states, R-97 provides environmentally-safe and worker-friendly solution for protecting porous masonry surfaces from water penetration. It creates coating that changes capillary force of pores in masonry from positive to negative and can be applied 3 days after new work on building's surface is complete. Only requiring one application, non-flammable and odorless solution is UV-stable and has breathability of 97 perms (WVP).

Doosan Infracore American Corporation
Suwanee, GA 30024
May 09, 2008 Powered by Honda GX120 4-cycle gasoline engine, Model BXR-60H, with 14 x 19 in. plate, offers 3,417 lb centrifugal force and is recommended for max compaction depth of 13 in. Model BXR-200H, powered by Honda GX240 4-cycle gasoline engine, delivers 7,053 lb of centrifugal force and can compact at depth up to 18 in. It features 18 x 29 in. plate and can cover 5,231 sq-ft/hr. Both vibratory plate compactors are suited for graded aggregates, sand, and mixed soils.

Kubota Tractor Corporation
Torrance, CA 90503
Apr 28, 2008 With full-flat deck and 4-post roll-over protective structure for operator safety, M59 tractor loader backhoe (TLB) features displacement engine to help reduce noise and vibration, standard spark arrestor muffler, and HST-Plus hydrostatic transmission. Backhoe offers 12 ft digging depth, bucket digging force of more than 7,600 lb, and dipper digging force of 4,731 lb. With maximum height of 10.5 ft, loader provides lifting power of 3,960 lb and has 7 ft bucket.

Trimble Navigation Limited
Sunnyvale, CA 94085-3913
Apr 23, 2008 With automatic blade control, Trimble® GCS900 Grade Control System v10.8 enables operator to grade simple pads and slopes as well as complex design surfaces and alignments. SiteVision® Office Productivity Module lets operators grade to cut/fill maps representing total earthworks progress on job site. As machines work, cut/fill maps are updated. Data can be transferred back to office at end of shift, reprocessed, and transferred back to machine at start of next shift.

Caldwell Group, Inc., The
Rockford, IL 61109
Apr 22, 2008 Combining reach of fork lift boom with precise lifting of winch, Winch Boom fits standard fork lift trucks. It is available in fixed, telescopic, and pivoting telescopic models with winch hook capacities of 2,000 or 2,400 lb. Unit features 110 V standard electrical operation, and with optional dc, hydraulic winch operation is available on any model.

Komatsu America Corp.
Rolling Meadows, IL 60008
Apr 09, 2008 Delivering 105 hp at 2,400 rpm, Models D39EX-22 and D39PX-22 crawler dozers are outfitted with 4.5 L, EPA Tier 3 emissions certified Komatsu SAA4D107E-1 engine. Equipped with Hydrostatic Transmission (HST), units have 20,834-21,804 lb operating weight range. Both standard (EX) and low ground pressure (PX) models are available to offer users weight distribution and flotation options.

Stone Construction Equipment, Inc.
Honeoye, NY 14471
Apr 08, 2008 Featuring 25.5 in. drum width and hydrostatic transmission, WBR650 is designed for confined area compaction in trenches as well as general asphalt patching and repair. Unit is powered by 10 hp Lombardini diesel engine, includes back-up recoil start, and offers compaction force of 2,925 lb. With max travel speed of 2.5 mph, roller has 10 in. curb clearance and 1 in. side clearance on both sides. Centrally located eccentrics evenly distribute compaction forces over drums.