Master Bond, Inc.
Hackensack, NJ 07601
Jun 06, 2008 Suited for metals, glass, ceramics, and most plastics, optically clear UV10MED is 100% reactive and does not contain solvents or other volatiles. One-part adhesive has cure times ranging from 5-10 sec upon exposure to UV lamp to 2-3 minutes at ambient temperatures. Service operating temperature range is -60 to 250°F, and low viscosity UV10MED exhibits tensile strength greater than 4,000 psi, shore D hardness greater than 60, and elongation of less than 5%.

Pres-On Products, Inc.
Addison, IL 60101
Jun 03, 2008 Designed for use by OEMs, FFVSA exhibits optimal grab and holding power when applied to wood, painted surfaces, and plastics. It is .005 in. thick, comes in widths from 3/16-54 in., and resists damage from water, humidity, and UV rays. Offered on 180 yd long standard rolls, product is suited for splicing fabric, film, and foil; laminating nameplates, metal, foams, and fabrics; as well as general-purpose mounting and holding.

Dymax Corp.
Torrington, CT 06790
Jun 02, 2008 Designed for bonding syringes and other stainless steel cannula to polycarbonate, PVC, glass, and polypropylene hubs, MD® Medical Device Adhesive 1162-M produces clear bonds and has low viscosity for air-free dispensing into needle hub cavities. Capable of curing upon exposure to UV/visible light, it is designed for high-speed and high-volume automated syringe assembly. For in-line inspection, adhesive fluoresces blue under low-intensity black light.

Master Bond, Inc.
Hackensack, NJ 07601
May 30, 2008 Adhering to metals, glass, ceramics, and most plastics, optically clear UV10MED is USP Class VI approved, resistant to chemicals and sterilants, and has service operating temperature of -60 to 250°F. Product is 100% reactive and does not contain any solvents or other volatiles. Curing in 5-10 sec with UV lamp and 2-3 min at ambient temperatures, UV10MED offers tensile strength greater than 4,000 psi, Shore D hardness greater than 60, and less than 5% elongation.

Almit Technology Ltd
East Sussex RH18 5DW  United Kingdom
May 30, 2008 Comprising of Sn96.5/Ag3.0/Cu0.5 with solder powder size of 4-24 microns, LFM 48 N paste suits package warpage and package-on-package fluxing applications during reflow. Paste delivers consistent dipping transfer characteristics coupled with strong tack performance to hold large devices firmly in position on high speed Pick and Place systems. It features designed Open Time in dipping tray of 8 hr (at 23°C and 50% RH) and up to 8 hr process window time between dipping and reflow.

Deposition Sciences, Inc.
Santa Rosa, CA 95403
May 29, 2008 Designed to maximize curing wavelengths between 220-400 nm and minimize rest of visible and IR spectrum from 450-2200 nm, UV Spectral Metal features MicroDyn® sputtering technology and is used as reflector behind curing lamp. Stable over temperature/humidity changes, it is coated onto highly polished, standard size aluminum sheets. With ability to customize/fabricate products after coating, long trough reflectors for inline exposure systems can be created using multiple lengths of product.

Scapa North America
Windsor, CT 06095
May 29, 2008 For structural and decorative use, Unifilm® U802 is used to attach architectural tension membranes to wide array of metal frames. Product laminates to variety of substrates including low surface energy plastics and untreated polyolefins. It provides high initial adhesion and builds to peel strength of 149 oz/in. Able to withstand environmental extremes, acrylic transfer adhesive offers UV, humidity, chemical, and temperature resistance.

Cortec Corp.
St. Paul, MN 55110
May 29, 2008 Designed to replace phosphatizing and chromating systems, VpCI(TM)-440 protects multi-metal substrates from corrosion while preparing metals for surface bonding and coating. Non-toxic, non-hazardous, water-based coating can be applied with conventional equipment such as sprayers, dipping tanks, steam cleaners, and power washers. Self-preserving product is environmentally safe and does not require use of biocides.

3M Company / Electronic Products Division
Austin, TX 78769
May 29, 2008 Applied around frame, 3M(TM) Impact Protection Adhesive bonds glass, window film, and frame together, protecting against severe weather damage, bomb blasts, or intruders. Combined with 3M Ultra Safety and Security Window Film, adhesive offers various levels of protection. Level 1 holds shards of glass together, while Level 2 creates stronger barrier to keep unwanted elements out. Level 3 incorporates gasket-style 3M Impact Protection Profile, which bonds filmed window and frame using 3M VHB tape.

Stik-II Products
Easthampton, MA 01027
May 27, 2008 Line of transfer tapes includes 1-4 mil unsupported transfer tape; up to 10 mil double coated tape with polyester, non-woven or paper support; and paper or poly liners either flood coated or extended, with or without print. Tapes are manufactured with adhesives ranging from general purpose permanents and removables to specific applications requiring LSE or HSE formulations.

Excel Scientific Inc
Wrightwood, CA 92397
May 22, 2008 Used with white clear-bottom microplates, BrightMax(TM) Adhesive White Vinyl Films help to maximize signals in luminescence assays. Split backing facilitates application of film to either top or bottom of plate. Applied to bottom of 96-well filter plate, film provides medium for holding dried filters removed from plate for microscopic examination and storage.

Stik-II Products
Easthampton, MA 01027
May 22, 2008 PermaSTIK Ultra High Bond Tape is available in thicknesses from 16-60 mil in water clear solid acrylic foam tape and gray or white coated acrylic foam tape, standard red poly liner, and widths from 3/8 to full log widths up to 34.5 in. It can be used for bonding architectural parts for windows and doors, trailer, RV, boat, bus and train manufacturing, appliance manufacturing, electronics manufacturing, including LCD displays and cell phones, and signage.

Powers Fasteners, Inc.
Brewster, NY 10509
May 21, 2008 Listed as category 1 product for uncracked concrete and dry holes, PE1000+ features 3:1 ratio holding power and meets International Building Code (IBC) requirements for strength design (Cracked Concrete). Dual-component system comes in 13 oz cartridge made from engineered plastic and can be dispensed with manually or pneumatically operated injection tool. Uses include anchoring threaded rod, bolts, reinforcing bars, and smooth dowels into concrete and other solid base materials.

Nova Films & Foils
Bedford, OH 44146
May 20, 2008 Designed for mounting to glass and high impact polystyrene, Permanent/Removable Double Coated Adhesives can be removed without leaving adhesive residue. Products come with clear/white carrier for opacity, coated with removable (low tack) adhesive on liner side and permanent (high tack) adhesive on exposed side. They are recommended for long- or short-term window displays, store signage, and graphics that temporarily replace existing display sign and for backlit displays.

Scapa North America
Windsor, CT 06095
May 19, 2008 Intended for general-purpose bonding and electronic product assembly, Thermofilm® H212U provides structural bond strength on plastics, metals, ceramics, wood, paper, and woven materials. Adhesive activates and cures on exposure to heat and pressure, and once cured, offers resistance to solvents, plasticizers, and elevated temperatures. Measuring 2 mil thick, nitrile phenolic thermosetting transfer adhesive is supplied on temperature-resistant, kraft release liner.

Honeywell International, Inc.
Morristown, NJ 07960-4648
May 09, 2008 PowerShield(TM) PV325 protects photovoltaic (PV) modules and their critical components in all types of environments such as humid conditions. It is UV-, moisture, - and weather-resistant, and can also withstand electrical load produced by modules. Based on barrier film technology, reflective white material has 5-layer design that includes 2 outer protective layers based on ECTFE fluoropolymer film and core PET layer, as well as 2 inner bonding layers of adhesive material.

Steelcote Manufacturing. Co.
St. Louis, MO 63103 2990
May 07, 2008 Featuring water-thin viscosity, Floor-Nu® Penetrating Sealer penetrates as deep as ¼ in. into pores of concrete or masonry surfaces in order to protect against effects of moisture, freeze/thaw cycles, salts, oils, and specific chemicals. This 2-component (1A:1B) clear epoxy, which can also be used on insulation and wood or concrete floors, locks in loose aggregate on surface and forms hard, impenetrable sub-surface. Coating contains 48% solids by volume.

Epoxies Etc.
Cranston, RI 02921-3407
May 06, 2008 One-component, electrically conductive 40-3910 is formulated for electrical and mechanical bonding of semiconductor, capacitor, and resistor chips in micro and opto-electronic hybrid circuit fabrication. Product does not require dry ice during transit and cures quickly at low temperatures. It provides optimized retention of strength after environmental aging.

Master Bond, Inc.
Hackensack, NJ 07601
May 06, 2008 With mix ratio of 100:65 by weight, EP29LPSP can withstand temperatures to 4 K, and resist cryogenic shocks (room temperature down to liquid helium temperatures in 5-10 min time period). It cures at room temperatures, and can be heat cured at 130-165°F for 6-8 hr. Chemical resistant adhesive features mixed viscosity of 400 cps, tensile strength of 6,500 psi, tensile modulus of greater than 375,000 psi, volume resistivity greater than 1,015 W cm, and Shore D hardness of 80.

Master Bond, Inc.
Hackensack, NJ 07601
May 06, 2008 With ability to withstand temperatures up to 500°F, 2-component optically clear EP121CL cures to tough solid with chemical resistance even when exposed to adverse environmental conditions. It features 12,100 psi tensile strength, 17,200 psi compressive strength, volume resistivity greater than 3 x 1,014 ohmW cm, dissipation factor of 0.020 at 1 MHz, and dielectric constant of 3.34 at 60 Hz. EP121CL is also available in 1-component and thermally conductive versions.