Scapa North America
Windsor, CT 06095
Aug 28, 2008 Withstanding temperatures up to 350°F, Scapa 815 3.2 mil thick tape is designed to mask and hold tools, forms, and parts for metal and composite bonding, and is also used for masking PCB contacts during conformal coating. It consists of high temperature nylon backing, single coated with rubber adhesive that eliminates potential for silicone contamination. Non-silicone tape withstands autoclaving if necessary.

Scapa North America
Windsor, CT 06095
Aug 26, 2008 Scapa 519 heat-resistant, non-silicone fume protection tape masks printed circuit boards during solder stripping and nickel/gold plating of finger contacts. It protects large areas of PCBs from chemical fumes and splashes. Product consists of conformable polyester film, single coated with rubber adhesive that removes cleanly and offers controlled adhesion. Chemically resistant tape has high-strength backing and withstands temperatures as high as 250°F.

Amerimax Building Products, Inc.
Plano, TX 75024
Aug 22, 2008 Formulated as resilient paint system, Aluma-Shield with Teflon® combines semi-gloss finish washability and matte finish aesthetics. Surface, which is resistant to chalking, fading, cracks, peels, warps, and termites, also repels oil, dirt, dust, and stains. Product withstands effects of UV rays, salt, pollution, and weathering.

TechFilm Corporation
Billerica, MA 01821
Aug 21, 2008 Meeting ASTM standard D3801 flammability specification, electrically isolating F2591 adheres to silicon, ceramic, aluminum, and copper substrates. RoHS-compliant product is stable at room temperature for 1 month and can be stored at 0°C for 3 months or -40°C for 1 year. Available in sheet or roll format up to 18 in., adhesive can be provided as film or preform in thicknesses from 1.5-7 mils. Typical cure schedule is 150°C for 60 min.

Pecora Corp.
Harleysville, PA 19438
Aug 20, 2008 Manufactured in one color and single limestone 5 gal unit configuration, Tilt-Seal(TM) is one-component, solvent-free, non-toxic, and environmentally friendly water-based acrylic latex sealant that comes with low VOC content, and features color stability and resistance to ultraviolet rays, ozone, and airborne contaminants. It can be painted within 24 hr, enables easy clean-up with water, and offers primerless adhesion to pre-cast concrete.

Schreiner Label Tech, Inc.
Southfield, MI 48034
Aug 18, 2008 Suitable for Nd:YAG, Vanadat, and fiber laser systems, Color Laser Film features modular design, where laser beam first penetrates laminate layer before hitting laser-active layer, which exposes colored layer of ink underneath. Marking process occurs emission-free inside film composite. Both UV- and weather-resistant, transparent laminate layer provides permanent protection of all data on label. Individual polymer layers are temperature-resistant from -40 to +130°C.

3M Co., Electronic Products Div.
Austin, TX 78726
Aug 15, 2008 Used for onsite jacket repair and splicing of mining cable, Scotch Heavy Duty Mining Tape 31 is flexible with self-healing property that keeps out moisture. Product is both oil and chemical resistant, and approved by Mining Safety and Health Administration and Pennsylvania Mining Authority.

Delta Chemicals Inc.
Smithtown, NY 11787
Aug 14, 2008 Available in clear or colors for indoor and outdoor use, Non-Slip and Non-Skid Coatings will resist chemicals and caustics. Products are designed for both foot and vehicle traffic and are packed in 1 and 5 gallon pails. Applied by roller, permanent epoxy and rubber-based coatings are suited for use on cement, concrete, metal, steel, wood, fiberglass, aluminum, and tile, as well as ceramic and porcelain tile.

DeWAL Industries, Inc.
Saunderstown, RI 02874
Aug 13, 2008 Designed to minimize friction and wear on high-speed extrusion coating equipment, pressure-sensitive DW 663 combines filled PTFE film with high-temperature silicone adhesive. Product is orange/brown in color and available in widths from 0.25-20 in. and 36 yard lengths. With temperature tolerance up to 500°F, tape is suitable for wrapping rollers that produce polyethylene coatings and laminations, calender paper, and revolve at very high speeds.

Aremco Products, Inc.
Valley Cottage, NY 10989
Aug 12, 2008 Mixed in ratio of 100 parts powder to 16-18 parts water by weight, Ceramacast(TM) 675-N aluminum nitride filled, thermally conductive compound is suited for potting high temperature electrical components. It features thermal conductivity of 100 W/m-K, dielectric strength of 300 V/mil, volume resistivity of 1,013 Wcm at room temperature, and compressive strength of 2,000 psi. Chemical and moisture resistant product sets fully at room temperature in 16 hr or is cured at 200°F in 2-4 hr.

Klein Tools, Inc.
Lincolnshire, IL 60069
Aug 12, 2008 Enabling electrical contractors to create majority of three-bend saddle and offset bends without complicated calculations, Offset Tape Stop(TM) Power-Return Rule has non-slip rubber grip that protects against impact, and dual end hook that attaches to conduits. Front of rule displays saddle bend calculations, while back of rule shows offset calculations, allowing users to determine angle bends. Weighing less than 1 lb, 1 in. wide rule extends up to 16 ft, and features self-lock blade.

Creative Materials Inc.
Tyngsboro, MA 01879-2724
Aug 04, 2008 Offered for variety of application techniques such as screen-printing, pad-printing, stencil application, and B-staged films, 118-06 series of single-component, electrically conductive, epoxy adhesives are also available as adhesive films, pre-cast on release liner at dry thicknesses ranging from 10-125 microns. B-staged adhesive films are already partially cured and can complete cure with exact amount of heat/pressure for specific period of time.

Master Bond, Inc.
Hackensack, NJ 07601
Aug 01, 2008 USP Class VI- and FDA-approved, EP41SMED low-viscosity epoxy adhesive has 5:1 mix ratio by weight. Bonds are resistant to water, oil, and many organic solvents as well as cold sterilants, ETO, and gamma radiation. It contains no solvents or diluents, adheres to wide variety of similar and dissimilar substrates, and is available for use in pint, quart, gallon, and 5 gal container kits. Shelf life in original unopened containers is 6 months minimum.

Adhesives Research, Inc.
Glen Rock, PA 17327
Aug 01, 2008 ARclad® 92262 and ARclad® 92264 electrically conductive adhesives exhibit adhesion to film and metal substrates, including Kapton®, gold, and stainless steel. ARclad® 92262 1.8 mil adhesive bonds to EMI shields, ground plane assemblies, and electrical interconnections. Designed for capacitance sensors, multi-pin connectors, and other fine pitch signal applications, ARclad® 92264 2.0 mil adhesive allows overlapping of multiple contacts without electrical cross-talk occurring.

Henkel Loctite Corporation
Rocky Hill, CT 06067
Jul 31, 2008 Based on FlexTec(TM) technology, Loctite® 5510(TM) Adhesive/Sealant and Loctite® 5570(TM) Adhesive are permanently elastic, non-corrosive, primerless formulations free of solvents, isocyanates, silicones, and PVC. Available in white, grey, or black, Loctite 5510 bonds and seals simultaneously, fills gaps, resists weather and moisture, and withstands shock and impact. Loctite 5570, offered in clear or white, replaces mechanical fasteners and rivets and provides vibration and sound-dampening.

Pres-On Products, Inc.
Addison, IL 60101
Jul 30, 2008 Coated on one-side with long-aging, high-tack acrylic adhesive, Pres-On® U6000 tape is suited for use in OEM product applications where gasketing, cushioning, and recovery is required. Two-sided U6200 can also be used in assembly applications as well as for secure mounting. Uniform cell structure allows application to clean, dry materials. While cushioning characteristics isolate vibrations, absorbent property traps moisture, light, dust, and contaminants.

Henkel
Rocky Hill, CT 06067
Jul 30, 2008 Loctite® 5510(TM) and Loctite 5570(TM) are primerless, one-component, odorless adhesives that cure by reacting with ambient moisture and achieve functional strength in 24 hr. Available in white, grey, or black, Loctite 5510 bonds and seals simultaneously, fills gaps, resists weather and moisture, and withstands ongoing shock/impact. Available in clear or white, Loctite 5570 replaces mechanical fasteners and rivets while also providing vibration- and sound-dampening benefits.

Kimball-Midwest
Columbus, OH 43228
Jul 28, 2008 Protecting materials by reducing heat transfer during soldering, brazing, welding, and open flame contact, Therma-Shield Heat Protection Paste eliminates disassembly of valves and other components. It can be applied to almost any surface or material, and conforms to irregular shapes and surfaces to provide total coverage and protection. Product is non-flammable, non-toxic, non-corrosive, and biodegradable, and helps eliminate waste as it can be applied only where needed.

Wacker Chemical Corp.
Adrian, MI 49221
Jul 28, 2008 Available in 1- and 2-component systems based on polyorganosiloxanes, SEMICOSIL® UV Elastomers cure at room temperatures within minutes. Curing rate can be controlled by appropriate selection of elastomer, UV dose, and process temperatures. Product generates no by-products during curing, making it suited for encapsulation of electronic components.

International Tape Co.
Windham, NH 03087
Jul 28, 2008 Optimized for strength, Product 207PXL consists of lightweight tissue coated on both sides with high-tack, dead load synthetic-based adhesive system. It has easy-release polysilicone liner and is recommended for applications that require bonding of medium- to heavy-weight pieces of advertising, displays, forms, and chipboard boxes. Solution is also suited for splicing because hand pressure is sufficient for transfer to most webs, after which liner can be removed.