Epoxies Etc.
Cranston, RI 02921-3407
Aug 29, 2007 Filled with pure silver, electrically conductive 40-3900 features electrical resistivity value of less than 1 x 10^-4 W-cm and operating temperature range of -50 to +170°C. Product cures in 24 hr at 25°C, 1 hr at 65°C or 15 min at 90°C. In addition to chip bonding in microelectronic and optoelectronic applications, 2-component resin is suited for microwave EMI and RFI shielding, assembly and repair of PCBs, and as cold solder.

DriTac Adhesive Group
Brooklyn, NY 11237
Aug 24, 2007 DriTac 7500 Eco-Urethane offers solvent-free, spreadable moisture cure urethane adhesive that contains zero VOCs and is suited for all green wood flooring building projects. Available in 2 and 4 gal containers, freeze-thaw-stable and non-slumping product contains no water and provides permanent bond for range of wood flooring options. It is suitable for above, on, or below grade installations and remains elastomeric to allow for normal expansion and contraction of wood flooring.

Henkel Corp.
Madison Heights, MI 48071
Aug 21, 2007 Designed to streamline die attach process, Hysol® QMI5100 and QMI5200 are formulated to combine properties and functions of die attach film and dicing tape. Curing takes place during standard molding process, eliminating need for dispensing or curing equipment. Formulated as pressure sensitive release materials, products leave no burrs after dicing, promote bondline thickness control, and enable die placement times down to 0.1 sec.

Aremco Products, Inc.
Valley Cottage, NY 10989
Aug 17, 2007 Pyro-Paint(TM) 634-AS-1 is used to bond, coat, and seal refractory fiberboard used in construction of IR heaters and molten metal handling components in foundry applications to 2,300°F. Applied by brush, roller, or spray equipment, this alumina-silica based, fiber-reinforced, ceramic coating system is resistant to wetting by non-ferrous molten metals and adheres to refractory fiberboard, graphite, as well as ceramic cloth and paper. Water-based formulation contains no VOCs.

Covalence Adhesives
Franklin, MA 02038
Aug 17, 2007 Patco 9425FR clear 6 mil, 2-layer tape features pressure sensitive flame retardant hydrophobic acrylic adhesive system as one layer and transparent flame retardant, mold and fungal resistant polyurethane film on the other. Formulated with non-polybrominated biphenyl ethers and non-polybrominated biphenyls, tape is moderately aggressive yet repositionable; adhesion builds 30-40% in 24 hours. It meets F.A.R 25.853a interior aircraft burn requirements.

Aremco Products, Inc.
Valley Cottage, NY 10989
Aug 16, 2007 Offering temperature resistance up to 350°F, Aremco-Bond(TM) 2300 consists of 100% solids epoxy mixed in ratio of 10 parts resin to 1 part hardener by weight. Mixed viscosity is 5,000 cP and pot life for 100 g mass is approximately 45 min. Milky-clear product provides resistance to acids, alkalis, organic fluids, and salts. Supplied in pint, quart, and gallon kits, adhesive is suited for bonding engineered thermoplastics, ceramic wear tiles, and sheet molding compounds.

Henkel Corp.
Madison Heights, MI 48071
Aug 16, 2007 Formulated for manufacturing flexibility through ease of set-up and consistent performance, Hysol® QMI708(TM) is developed to attach die 2.5 x 2.5 mm and smaller in QFN and SOIC packages using copper finished leadframes. Conductive product exhibits minimal bondjoint resistance, minimizing energy drainage. Properties of this material allow for wide dispense window, and product dispenses without tailing.

Hexis USA LLC
Corona, CA 92880
Aug 07, 2007 Available in 48 in. x 65 ft rolls, Carprotect transparent 5.9 mil film with shockproofing properties protects vehicle paintwork against environmental aggressions. It protects vehicle bodywork, doorsills, bumpers, headlights, and wing mirrors against damage from stone chips. Film resists carwash brushes, high-pressure steam cleaners, abrasion, friction, exposure to sunlight, and petrol spillage. Adhesive formulation allows clean removal of film without leaving adhesive residues.

Master Bond, Inc.
Hackensack, NJ 07601
Aug 06, 2007 In 6 mil thick films, Master Bond EP27 will set in as little as 2 hr at 40°F and will cure in 48-72 hr. Product has non-critical mix ratio of 2:1 by weight or volume and mixed viscosity of 2,000 cps. Cured epoxy resin offers long-term resistance to immersion in aggressive solvents such as ethanol, toluene, butyl cellosolve, 70% sulfuric acid, 30% nitric acid, 50% sodium hydroxide, and bleaches. It also offers high bond strength to metallic and non-metallic substrates.

Permatex Inc.
Hartford, CT 06106
Aug 02, 2007 Permatex Spray 'N' Seal Leak Repair seals low-pressure leaks using wicking action to form durable rubber barrier from outside of part or assembly. It fills gaps up to .040 in. and works from -65 to +350°F continuous and up to 400°F intermittent. Available in 9 oz aerosol can with extra spray nozzle and straw extension, sealant dries tack-free in 5 min, fully cures in 30-45 min, and is highly resistant to common shop fluids.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Jul 20, 2007 Combining thermoplastic rubber with butyl rubber sealant, FSTW Tape provides complete rejacketing solution in one pass and delivers submersible watertight seal. With 50 mil thickness, FSTW offers puncture protection. It is available in point-of-purchase packages of five 4 ft rolls or bulk packaging of twelve 6 ft rolls. Tape is suited for repairing cable jackets, sealing low voltage splices, and rejacketing of medium voltage cable splices.

Adchem Corp.
Riverhead, NY 11901
Jul 19, 2007 Used in temperatures to 300°F, 7740 series delivers bond strengths sufficient for splicing metal coils and other demanding applications. Tape adhere to metals and plastics, including low surface energy substrates, and fiber reinforcement provides stability when product is slit to widths as narrow as 1/8 in. Utilizing pressure-sensitive acrylic adhesive system 7742-74 (2 mil) and 7745-74 (4 mil) are resistant to thermal cycling, salt solution, acid, brake fluid, and UV environments.

Federal Process Corp.
Cleveland, OH 44128
Jul 17, 2007 Featuring PTFE, Gasoila E-Seal® provides positive seal on pipe threads, joints, bolts, fittings, hoses, nozzles, and couplings, as well as pump assemblies and fuel lines. Non-hardening, non-toxic formula is compatible with E10 and E85 gasoline. Available in ¼ and 1 pint brush-top jars, soft-setting paste seals liquids up to 10,000 psi and gases up to 3,000 psi. It is effective from -100 to 800°F and is safe on brass, copper, stainless steel, aluminum, black pipe, tin, and galvanized pipe.

Hexis USA LLC
Corona, CA 92880
Jul 17, 2007 Suitable for solvent and eco-solvent inkjet printers, HX102CG1 consists of clear cast 2 mil vinyl with embossed liner carrying structured adhesive. Product stays repositionable during application for transfers without bubbles onto vehicles, corrugated surfaces, and other difficult substrates. It comes in 54 in. wide rolls in lengths of 148, 328, or 656 ft.

Aremco Products, Inc.
Valley Cottage, NY 10989
Jul 10, 2007 Suited for applications up to 3,200°F, magnesium oxide-based Ceramabond(TM) 571 demonstrates volume resistivity of 109 W-cm, dielectric strength of 255 V/mil, and tensile shear strength of 500 psi. Two-part, water-based product features mixed ratio of 1.5 parts powder to 1.0 parts liquid by weight. Adhesive sets at room temperature and is cured rapidly at 200°F in 1-2 hr. It is completely inorganic with no VOCs and will not outgas in ultra high vacuum.

Pres-On Products, Inc.
Addison, IL 60101
Jun 29, 2007 Offered in widths of 3/16-18 in., 0.045 in. thick PHB2000 provides pressure-sensitive bonding while also serving to reduce and dampen vibration and sound. Uniform, high-tack acrylic adhesive on both sides bonds to most substrates and withstands weathering from moisture and sub-zero temperatures without loss of bond strength. Flexible, moldable, and compressionable, tape conforms to intricate shapes during manufacturing and will not stain or harden due to age.

Dymax Corp.
Torrington, CT 06790
Jun 28, 2007 Suited for medical devices, DYMAX MD® 1161-M provides single solution for bonding various combinations of dissimilar substrates such as polycarbonate, acrylic, nylon, stainless steel, PVC, and polyurethane. Product cures in seconds upon exposure to UV/visible light, and fluoresces under low-intensity black light for immediate in-line functional testing and inspection.

Dymax Corp.
Torrington, CT 06790
Jun 26, 2007 Formulated for applications where clear, invisible bonds are required, LCD Adhesives resist yellowing, allowing for optimal light transmission. With UV light, solvent-free products bond in seconds to variety of substrates including polycarbonate, glass, CAB, acrylic Phenolic, PET, and ITO. On demand cure means substrates can be repositioned precisely until parts are ready to be cured. Minimized air entrapment and no bubbles create ripple-free bonds for panel strength.

Huntsman Advanced Materials
Los Angeles, CA 90039-1011
Jun 25, 2007 Specifically formulated for bonding thermoplastics, Araldite® 2018 polyurethane is supplied as 2-component system that produces bonds with UV stability. It attains handling strength after 4 hr at room temperature or 4 min at 212ºF. Designed for use on polyamides, thermoset composites, ABS, metals, and ceramic substrates, Araldite 2055 gap-filling polyurethane has 1 hr pot life and maintains bond strength when exposed to fluids, heat, and humidity. It can be cured in 20 min at 212ºF.

Globus Medical, Inc.
Phoenixville, PA 19460
Jun 07, 2007 NuBone(TM) Osteoinductive Bone Graft product line includes 100% allograft tissue product, composed of osteoinductive demineralized bone matrix (DBM) combined with cortical bone gelatin carrier. Free of chemical additives and synthetics, NuBone DBM Putty and NuBone DBM Gel are designed for use in spinal fusion, trauma, and reconstructive bone grafting procedures. Aseptic manufacturing process maximizes osteoinductivity.