Pres-On Products, Inc.
Addison, IL 60101
Dec 27, 2007 Slit-cut into 3/16 in. widths and pre-packaged onto common core, S-600 is set side-by-side on spool to accelerate and facilitate removal and application for line workers. It prevents penetration of fine particles and helps protect products from environmental damage. UL-recognized for flame retardance and gasketing, tape is constructed of medium-firmness silicone and has pressure-sensitive acrylic adhesive, rated from -25 to +300°F, applied to one side with removable liner.

Electronics Assembly, Henkel Corporation
Irvine, CA 92618
Dec 12, 2007 Suitable for laptops and gaming consoles that may experience only occasional vibration, 1-component Loctite® 3508 is pre-applied at corners of CSP pad site using standard dispensing system. It can be applied in-line with existing equipment with curing taking place during normal solder reflow process. Reworkable, lead-free compatible material enables total ball collapse and self-alignment properties to compensate for slight component-to-pad misalignment during placement.

Aremco Products, Inc.
Valley Cottage, NY 10989
Dec 10, 2007 Containing no asbestos or VOCs, Graphi-Bond(TM) 669 bonds, fills, and repairs carbon-carbon and graphite components/structures used in oxidizing and reducing atmospheres to 2,500°F. This single-part, graphite-filled, silicate-bonded, and waterborne adhesive exhibits 4.2 ppm x 10^-6/°F coefficient of thermal expansion, which makes it suited for thermal cycling applications. Adhesive cures at room temperature for 1-2 hr, followed by heating to 200°F for 2-4 hr.

3M Adhesives & Tapes Div.
St. Paul, MN 55144 1000
Dec 06, 2007 Designed to cure to tough plastic in absence of oxygen and in presence of metal, Rite-Lok Anaerobic Adhesives are suited for threadlocking, retaining, gasketing, and sealing. Rite-Lok Cyanoacrylate Adhesives, also known as instant adhesives, are liquid and gel formulations designed to cure in seconds to bond many substrates. Two-step Rite-Lok Structural Acrylic Adhesives can bond different substrates, such as metal to stone, plastic to metal, metal to metal, plastic to plastic.

Pres-On Products, Inc.
Addison, IL 60101
Dec 05, 2007 Resistant to UV light, ozone, and corrosion, S-600 and S-800 safely seal and protect outdoor communications, electronics cabinets, HVAC units, and HID lighting enclosures from rain, fine particles, and extreme climates. Medium-density tapes feature acrylic (S600) or silicone (S800) pressure-sensitive adhesive on one or both sides and are UL-recognized for flame retardance and gasketing. Lengths up to 60 ft, as well as several thicknesses and colors, are available.

Weld-Aid Products
Detroit, MI 48212
Dec 03, 2007 Made of 95% zinc, 1st Zinc is used on metal parts and assemblies as either protective primer coat to be later topcoated or as standalone coating. Formula provides corrosion protection in cold-galvanizing applications and meets requirements listed in ASTM-780, ASTM-D-520, Fed Spec DOD-P-21035A, MIL-P-26915A, and SSPC-Paint 20 specifications. Product is available in aerosol cans and bulk gallons.

PAM Fastening Technology
Charlotte, NC 28208
Dec 03, 2007 Designed for use on finished or unfinished leather, UX8012 acrylic hot melt adhesive is also suited for use with plastics, EPDM rubber, metals, and foils. Non-visible bond sets in 60 sec. Available in ½ in. glue sticks or 1¾ in. slugs in 22 lb cartons, adhesive has softening point of 194°F and working temperature from 356-392°F. It can be applied using Model HB 220 applicator, which has adjustable temperature range from 284-428°F.

Master Bond, Inc.
Hackensack, NJ 07601
Nov 30, 2007 Curing at room temperature when exposed to UV light source, UV22 nanosilica-filled, one-component, UV-curable epoxy is not oxygen inhibited. Abrasion-resistant epoxy has service operating temperature range of -60 to +300°F and adding 195-257°F for 30 min gives it glass transition temperature of 275°F. It has Shore D hardness of greater than 80, tensile strength of greater than 4,600 psi, refractive index of 1.52, and shrinkage of 1-2%.

SEI Chemical
Northridge, CA 91324
Nov 30, 2007 SCS-100 Wood Deck Sealer features water preventative technology utilizing nanoparticulate that does not allow moisture to hold wet edge. Resin can be applied to wet and dry substrate and is able to penetrate and chemically bond to organic and inorganic materials, building durable, breathable film. Compliant with VOC requirements under Consumer Products regulations in all 50 states, it is available in natural and tan flat finish with coverage up to 200-400 sq ft/gal.

Dymax Corp.
Torrington, CT 06790
Nov 30, 2007 Forming tough, flexible bonds, solvent-free DYMAX MD® 1165-M cures in seconds upon exposure to UV/visible light and fluoresces to enable in-line inspection. When cured with UV light curing spot lamps, focused beam lamps, or flood lamps, RoHS-compliant product speeds medical device assembly.

Dymax Corp.
Torrington, CT 06790
Nov 29, 2007 Suitable for bonding various combinations of dissimilar substrates, DYMAX MD® 209-CTH is solvent-free and cures upon exposure to UV and/or visible light. Product fluoresces for in-line inspection under low intensity black light. When cured with DYMAX spot, focused beam, or flood lamps, adhesive speeds medical device assembly while maximizing worker safety.

ITW Plexus
Danvers, MA 01923 3712
Nov 28, 2007 Two-part 1:1 structural methacrylates are non-sagging gels that dispense manually or with standard meter-mix equipment. They are available in 400 ml cartridges, 5 gal pails, and 50 gal drums. With working time of 30-40 min, MA530 Plexus® structural adhesive fills gaps up to 0.70 in., while MA560-1 offers working time of 55-70 min and fills gaps up to 1.00 in. Formulated for building large fiberglass boats, MA590 has working time of 90-105 min.

Krylon Products Group
Cleveland, OH 44115
Nov 28, 2007 White Lightning® Polyurethane Sealant is mildew- and rust-resistant and withstands up to 50% joint movement. It is suited for interior and exterior projects and does not require mixing. Available in smooth and textured finishes, CARB-compliant sealant meets requirements of TT-S-00230 C (Type II) Class A, Non-sag, One-component and ASTM C-920 Type S, Grade NS, Class 25, Use-NT, Use-A, Use-M, Use-G, and Use-O.

Power Adhesives Ltd
Basildon, Essex   United Kingdom
Nov 27, 2007 KNOT-TEC(TM) System lets manufacturers of such products as windows, doors, and furniture use entire board, rather than just portions before or knot or defect. Combining TEC(TM) 250 hot melt adhesive applicator and TECBOND(TM) 7718/12 polyamide hot melt glue sticks, system repairs knots and fills wooden surfaces so that they are smooth and unnoticeable prior to painting/finishing. Solution performs repairs in seconds, and any surplus glue can be removed with chisel or cutting tool.

Epoxies Etc.
Cranston, RI 02921-3407
Nov 21, 2007 Formulated with high purity polymers and ultraviolet protectors, Type 20-3302 epoxy system is formulated to minimize yellowing when cured. Curable at room temperature, it features water clear clarity, bubble free castings, and low viscosity for quick self leveling. Available in 2 different viscosities, it is suited for LED potting, fiber optics, and other clear adhesive or encapsulating applications.

Frank Lowe Rubber & Gasket Co., Inc.
Farmingdale, NY 11735
Nov 20, 2007 Series GLZ 3500 Cross Linked Polyethylene Glazing Tape is available in 1/16 and 1/8 in. thicknesses and Series GLZ 5500 is 1/32 in. thick. AAMA-approved tape bonds with wood, aluminum, SS, and PVC window frames. Supplied with non-tear blue film liner, it is designed to block water, moisture, light, and dust and is resistant to UV, weathering, oxidation, and temperature variation.

Innovatier
Lakeland, FL 33815
Nov 15, 2007 ProTeCut(TM) provides protective perimeter for components in order to make smart devices difficult to cut without professional tools. Utilizing Reaction Injection Embedding®, this cut-resistant technology delivers component protection and can be integrated into active RFID and smart card platform designs. Solution also lets consumers cut through their cards safely by protecting select components.

3M Co., Electronic Products Div.
Austin, TX 78726
Nov 14, 2007 Available in 1 in. x 30 ft rolls, Scotch Silicone Rubber Electrical Tape 70 HDT is Class H material and is suitable for 180°C continuous operation. Tape has peak thickness of 20 mil and edge thickness of 8 mil, and features blue center guide line. Made of self-fusing, inorganic silicone rubber, it may be used on terminations operated outdoors or indoors and in areas subject to increased levels of contamination or moisture.

Master Bond, Inc.
Hackensack, NJ 07601
Nov 08, 2007 Formulated to cure quickly at ambient temperatures, Supreme65HT-6 produces bonds with tensile lap shear strengths in excess of 3,000 psi for service in temperature range of below -80°F to +400°F. It is resistant to vibration, stress fatigue cracking, moisture, creep, and corrosion. Available in pre-measured bubble packs, cartridges, ½ pint, pint, quart, gallon, and 5 gal containers, unit offers adhesion to metal, glass, ceramics, wood, vulcanized rubbers, and plastics.

Pres-On Products, Inc.
Addison, IL 60101
Nov 06, 2007 Medium-density P9100 and soft-density P9200 closed cell EPDM tapes meet needs of maintenance and construction crews for weather stripping, dust-proofing, sound dampening, and thermal insulation. Tapes are single-coated with professional-grade acrylic adhesive that has removable liner. Featuring temperature range of -65 to +200°F, they can be ordered in standard thicknesses of 1/6 to ½ in. and in lengths up to 100 ft.