Creative Materials Inc.
Tyngsboro, MA 01879-2724
Mar 18, 2008 Featuring thermal stability and chemical resistance, 124-34A/B-187 consists of 2-component syringe dispensable, isotropically electrically conductive, epoxy adhesive, while 125-01A/B-187 offers 2-component syringe dispensable, anisotropically conductive version of product. Cure times as fast as 7-10 seconds can be achieved at elevated temperatures. Applications include assembly of electrical and electronic components.

Adchem Corp.
Riverhead, NY 11901
Mar 11, 2008 Utilizing flexible PET carrier to allow for die cutting and converting, plasticizer-tolerant 668M offers long term shear strength as well as 150°F heat strength and UV resistance for indoor and outdoor use. High mass adhesive system is suitable for wide range of industries, including automotive, transportation, marine, plastic and rubber extrusions, and appliances for sound deadening.

Power Adhesives Ltd
Basildon, Essex   United Kingdom
Feb 15, 2008 Suited for securing and positioning reinforcement materials in vacuum infusion processes, VAC-TAC(TM) aerosol adhesive system consists of Powder Adhesives TEC 6300 spray hot melt glue gun, 20 ft of hose, and VAC-TAC(TM) adhesive in hot melt cartridge form. System holds even large composite material structures in place as well as typical vacuum processing products including reinforced fabrics, foam, balsa, bleeders, breathers, peel plies, and release films.

Henkel Corp.
Madison Heights, MI 48071
Feb 08, 2008 Formulated for use on FPR, epoxy, and composite mold surfaces, Frekote® FMS-100(TM) solvent-based sealer is used to seal new molds and repair microporosity in older molds. High performance sealant is hand-applied in thin, even coat at room temperature. Available in 1 pint and 1 and 5 gal containers, it contains no CFCs and is shelf-stable for 12 months from date of manufacture.

Master Bond, Inc.
Hackensack, NJ 07601
Feb 07, 2008 Able to be used in thick and thin cross sections, EP30FL epoxy potting and encapsulation compound is 100% reactive and does not contain any volatiles. It cures at room temperature with minimal shrinkage and adheres to similar as well as dissimilar substrates. Recommended for use in environments exposed to thermal cycling, solution can withstand mechanical shock and vibration. Hardened compound exhibits electrical insulation properties and resistance to water.

Master Bond, Inc.
Hackensack, NJ 07601
Feb 06, 2008 Adhering to metallic and nonmetallic substrates, Epoxy Type EP11SIC is supplied as silver colored flowable paste with tensile strength greater than 6,000 psi and tensile shear strength over 1,500 psi over temperature range of -60 to +300°F. Gel time at 300°F is 20-25 min while cure is 40-50 min at 347°F. Performance properties include volume resistivity less than 0.001 ohm-cm, surface resistance of less than 1 ohm/square, and thermal conductivity of 7.9 W/meter-°K.

Master Bond, Inc.
Hackensack, NJ 07601
Feb 05, 2008 Used in general-purpose bonding applications or as electrical insulator, Polymer Adhesive EP44 gels in 3 min and cures within a few hours at ambient temperatures to develop bonding shear strength of 3,150+ psi. Parts bonded with this solution can be safely handled within 30 min, and bonds are resistant to thermal cycling as well as chemicals over -60 to 250°F range. Product adheres to metals, glass, ceramics, wood, vulcanized rubbers, and plastics.

CS Hyde Company
Lake Villa, IL 60046
Feb 05, 2008 Available in 1 in. wide and 4 yd long, Silicone Self-Fusing Tape Multipack contains 3 rolls of Clear Reinforced, Triangular Black, and Rectangular Red. Resistant to moisture, oxygen, and ozone over broad temperature range -65 to 500°F, silicone self-fusing tape can be used in variety of industries from aerospace to automotive repair.

Bayer MaterialScience, LLC
Pittsburgh, PA 15205-9741
Feb 04, 2008 Used as base resin in solvent-free sealant, Desmoseal® S XP 2636 silane-terminated polyurethane prepolymer eliminates bugholes in concrete surfaces. Product cures with moisture from air, or from substrate to which it is applied. Finished product will not foam in presence of water, and provides optimal UV stability as well as adhesion to concrete. Sealant can be used on any concrete surface that has been poured into mold including concrete basement and retaining walls.

Dymax Corp.
Torrington, CT 06790
Jan 29, 2008 DYMAX adhesives formulated with See-Cure(TM) technology are bright blue in color in uncured condition, making them visible on surface of substrates, in deep wells, or when sandwiched between 2 layers of materials. Adhesives will not permanently stain component surfaces that they contact. Blue color indicates when sufficient light energy has been provided to adhesive bond area to achieve full cure and color fades and turns clear upon full cure.

Scapa North America
Windsor, CT 06095
Jan 28, 2008 Formulated for use in commercial sign production, truck/trailer/RV manufacturing, window fabrication, construction, metal bonding, and general industrial assembly, Models A1130TP-PE and A1160TP-PE clear acrylic foam tapes create permanent bond on metals, glass, plastics, wood, composites, and painted surfaces. Model A1130TP-PE is 25 mil thick, while model A1160TP-PE is 40 mil thick. Both tapes deliver aging and weathering properties, and are offered with 4 mil red polyethylene liner.

Scapa North America
Windsor, CT 06095
Jan 25, 2008 Designed for temporarily mounting artwork, labels, and decals, Dublfilm S268 consists of polyester film double coated with removable acrylic adhesive on liner side and permanent acrylic adhesive on exposed side. Temporary adhesive can be removed from any substrate except aluminum, while permanent adhesive bonds to many substrates. Double coated pressure sensitive film laminates to foam and felt materials, and can be used to make protective pads.

Scapa North America
Windsor, CT 06095
Jan 25, 2008 Dublfilm SP507T is double-coated, pressure sensitive adhesive tape that suits bonding, splicing, and assembly applications. Featuring conformable tissue carrier coated on both sides with aggressive acrylic adhesive, it offers dimensional stability and strength, and can be die cut. Resistant to environmental extremes, tape bonds to low surface energy plastics, offers adhesion to ether- and ester-type polyurethane foams, and provides high tack and peel.

Scapa North America
Windsor, CT 06095
Jan 24, 2008 Formulated to bond to wide variety of substrates including plastic films and paper, Scapa T300 is 4.0 mil tape that consists of 2.0 mil thick metalized PET carrier coated on one side with acrylic adhesive. Anti-scratch and self-wound product can withstand high temperatures, and provides high peel and tack along with quick-stick and peel strength. It is designed for decorative trim attachment, display mounting, and general product assembly applications.

Adchem Corp.
Riverhead, NY 11901
Jan 18, 2008 Offering long-term shear strength, AdMount® 8130 Series high mass adhesive system uses flexible PET carrier to allow for conformance to scrim-reinforced banner materials. Hand-tearable, plasticizer-tolerant tape combines 150°F heat strength with UV resistance for long-term indoor and outdoor use.

Aremco Products, Inc.
Valley Cottage, NY 10989
Jan 17, 2008 Pyro-Paint(TM) 634-BNSC is single part, odorless, water-dispersible coating formulated to resist molten metals, glasses, plastics, and salts as well as non-ferrous metals such as molten aluminum and magnesium. It provides highly lubricious and chemically resistant interface between molten material and underlying refractory structure. Applied with brush, roller, or spray equipment, coating dries at room temperature in 1-2 hr and cures fully in 1-2 hr at 200°F.

Adchem Corp.
Riverhead, NY 11901
Jan 15, 2008 Developed for Kynar 500® pvdf resin based coating systems, Vitrasil® acrylic polyester, and powder-coated finishes, Low Surface Energy Simulated Divided Light Tapes eliminate need for liquid silane adhesion promoters. They provide long-term indoor and outdoor adhesion to variety of window substrates, and also bond to cellular PVC, vinyl, primed and unprimed wood, plastic, and painted aluminum muntin bars. Available in .032 black, tapes are resistant to air, water, detergents, moisture, UV light, and dust.

Dow Chemical Co., The
Midland, MI 48674-0001
Jan 14, 2008 Suited for use in amine, DICY, anhydride, and phenolic cured epoxy systems, FORTEGRA(TM) Epoxy Tougheners are available in 4 forms, and provide adhesion and corrosion and chemical resistance. FORTEGRA 100 is epoxy toughening agent, while FORTEGRA 383-50 and 383-5 are blends of D.E.R(TM) 383 liquid epoxy resin with 50 and 5 weight percent, respectively, of toughening material. Used in powder coatings, FORTEGRA 664-12 is 12 weight percent blend of toughening material in D.E.R. 664.

Master Bond, Inc.
Hackensack, NJ 07601
Jan 11, 2008 One-component Polymer System EP11HT cures in 110 min at 250°F or 75 min at 300°F. It attains tensile shear strength of greater than 3,300 psi to form rigid and dimensionally stable bonds. Resistant to acids and solvents, service temperature range is -60 to 400°F and it bonds to substrates including metals, glass, ceramics, and plastics. EP11HT is available in pint, quart, 5 gal containers, and non-drip version EP11HTND-2.

Chemetall Oakite Products, Inc.
Berkeley Heights, NJ 07922 2712
Jan 10, 2008 Providing iron phosphate coating for ferrous metals, Chem Cote 3010 works at temperatures below 90°F, eliminating use of any burner. It is pre-paint treatment for iron and steel that makes resulting surface highly resistant to corrosion.