Huntsman Corp.
The Woodlands, TX 77380
May 02, 2008 Formulated for joining glass-reinforced plastics, SMC, ABS, and PVC, Araldite® 2055 adhesive is paste that has work life of 45-60 min at room temperature and bonded components can be handled after 6 hr at 73ºF. Thixotropic and gap-filling polyurethane adhesive is packaged in 400 mL dual-barrel cartridges that ensure thorough blending with disposable static mix nozzles.

National Adhesives
Bridgewater, NJ 08807
May 02, 2008 Suited for moderate and difficult substrates in folding carton and glued lap applications, high pressure VelocityP3(TM) 33-715A(600 cps) and low pressure 33-715B (300 cps) clean-running adhesives eliminate build-up on nozzles and do not trail during application. They are resistant to water, heat, and cold, and are compatible with extrusion systems including those from Bobst, HHS, Valco, Nordson, Pafra, Leary, and ITW.

National Adhesives
Bridgewater, NJ 08807
May 02, 2008 Designed to solve problems associated with nozzle build-up, VECTORSEAM® Adhesives allow tight tolerances on envelope seams and enable consistent cut-off, even at high speeds. VECTORSEAM family includes 3 adhesives covering general purpose, slower setting, and best machining options.

Aremco Products, Inc.
Valley Cottage, NY 10989
Apr 30, 2008 Crystalbond(TM) 509 is high-strength, thermoplastic adhesive used to temporarily secure alumina substrates and other technical ceramic materials for dicing, grinding, and polishing operations. It is applied by preheating mounting plate to 250°F, melting and spreading adhesive in uniform layer, then positioning part over adhesive, allowing assembly to cool. It dissolves in acetone or Aremco 509-S environmentally friendly cleaning agent that leaves no film or residue.

Henkel
Rocky Hill, CT 06067
Apr 30, 2008 Compatible with various paint systems, Terostat® 7100(TM) Adhesive/Sealant and Terostat 7700(TM) Adhesive are primerless, permanently elastic formulations used to bond and seal dissimilar substrates. Both one-component, odorless adhesives are non-corrosive and free of solvents, isocyanates, silicones, and PVC. They resist aging and weathering, cure by reacting with ambient moisture, and achieve functional strength in 24 hr.

ConProTec Inc.
Salem, NH 03079 2060
Apr 29, 2008 Available in volumes from 75-1,500 mL with ratios of 1:1, 2:1, and 10:1, cartridges are offered in polypropylene and nylon to meet requirements of chemistries used in construction industry applications. Peeler Cartridge lets users package 2-component material in one cartridge that fits standard caulking guns. Also available, static mixer models range from traditional helical style to square Quadro design. Disposable static mixers are also available.

Scapa North America
Windsor, CT 06095
Apr 29, 2008 Consisting of thin polyester carrier coated on each side with pressure sensitive acrylic adhesive, Dublfilm S1086 is suited for general-purpose product assembly involving ABS, polyethylene, polypropylene, polystyrene, and many foams. Adhesive withstands range of environmental extremes and offers UV, humidity, and temperature/chemical resistance. Supplied with 76 No. polycoated release liner, Dublfilm S1086 provides balance of peel and shear strength.

Electronics Assembly, Henkel Corporation
Irvine, CA 92618
Apr 21, 2008 Reflow curable encapsulant material, Hysol® FF6000(TM), combines flux functionality and underfill protection into one solution. It is formulated to provide flux for lead-free solder joint formation and, when cured, delivers protection against mechanical stress. In-line approach eliminates neeed for dispensing equipment as well as time required for underfill application and cure. Areas of use include Package-on-Package device configurattions and/or large (23 x 23 mm or up) BGAs and CSPs.

Henkel Loctite Corporation
Rocky Hill, CT 06067
Apr 18, 2008 Curing tack-free within seconds, Loctite® 3974(TM) permanently bonds materials with differing coefficients of thermal expansion and accommodates substrate expansion/contraction. Single-component acrylic adhesive cures upon exposure to UV or visible light and can be used on glass, thermoplastic, and metal assemblies for medical device bonding, potting, and sealing applications. Characteristics include A70 Shore hardness and 100% elongation.

Aremco Products, Inc.
Valley Cottage, NY 10989
Apr 18, 2008 Used to bond aluminum panels and copper heat exchange tubes, Aremco-Bond(TM) 568 is aluminum-filled epoxy system that offers thermal conductivity of 9.0 Btu-in./hr-ft²-°F and flexural and tensile strength of 11,400 and 2,500 psi, respectively. Resistant to acids, bases, salts, and organic fluids, it mixes in 1:1 ratio by weight or volume, cures at room temperature or with low heat, and provides total mass loss of 0.75% at 125ºC and 0.35% of collected volatile condensable materials at 25ºC.

Huntsman Corp.
The Woodlands, TX 77380
Apr 18, 2008 Araldite® 2018 is light-colored, low-viscosity polyurethane adhesive formulated for joining ABS, SMC, polycarbonate, and glass-reinforced plastics. Maintaining bonds when exposed to vibration, water, and UV light, thixotropic, gap-filling adhesive cures in 16 hr at 73ºF or in 3 hr at 104ºF. It is packaged in dual-barrel cartridges that provide for precise ratio control of resin and hardener.

Omega Engineering, Inc.
Stamford, CT 06907
Apr 17, 2008 Designed for process temperature control, freeze protection, and supplemental heat, HTWAT series tapes offer adjustable thermostat control up to 425°F and are resistant to moisture as well as chemicals. In addition to being suited for electrically conductive surfaces, CE-compliant products can be used on valves, pipe lines, bearings, filter housings, and actuators. Areas of use include manufacturing, construction, petroleum, and public works industries.

Sherwin-Williams
Cleveland, OH 44115
Apr 16, 2008 Free of hazardous air polluting solvents, anti-corrosive SeaGuard 6200 can be applied at temperatures as low as 20°F, making it suited for vessel maintenance during winter lay-up. Product may be used on many prepared steel substrates, including bilges and wet void areas, decks and superstructures, and underwater hulls. Applied by brush, roller, or spray, coating is suited for fabrication and new construction along with maintenance and repair.

Henkel Loctite Corporation
Rocky Hill, CT 06067
Apr 15, 2008 Adhesin® 56-5545(TM) water-based adhesive for wet-bonding insulation to metal ducts and cabinets may be applied using spray gun or hand-applied with brush or roller. Offering UL Class 1 certification, it meets ASTM E-84 and ASTM C-916 requirements and dries in less than 10 min. For proper drying, adhesive must be used with at least one porous substrate. It can be used on painted or unpainted metals and is available in 5 gal pails and 275 gal tote containers.

Merquinsa North America Inc.
Seabrook, NH 03874
Apr 15, 2008 Pearlbond® ECO D900 TPU (Thermoplastic Polyurethane) grade, for footwear and textile applications, can be processed by extrusion or in powder form via sintering. Non-reactive hot melt adhesive features Oeko-Tex Class I compliance and 75% renewable content. For High Performance Reactive Hot Melts (RHMs), Pearlbond® ECO D590 offers characteristics optimized for green strength and setting/open times. It addresses challenges of water-based adhesives in automotive and furniture industries.

Henkel Corp.
Madison Heights, MI 48071
Apr 14, 2008 Intended for appliance and HVAC assembly, water-based Adhesin® 56-5545(TM) facilitates attachment of lightweight insulation to metal and may be applied using spray gun or hand-applied with brush or roller. Flame-retardant product meets ASTM E-84 and ASTM C-916 requirements and dries in less than 10 min. Available in 5 gallon pails and 275 gallon tote containers, adhesive must be used with at least one porous substrate to allow proper drying.

Rogers Corporation
Rogers, CT 06263 0188
Apr 10, 2008 Designed to accommodate range of flexographic printing applications, R/bak SA 3000 Series open cell polyurethane mounting tapes come in 15 and 20 mil and provide cushioning needed to absorb shock. Soft R/bak SA 3100 is intended for combination jobs with demanding halftone process and fine screen work, while medium R/bak SA 3300 is suited for combination jobs with screen, line, and solid work. Firm R/bak SA 3500 addresses combination jobs with bold lines and solids with darker screens.

Excel Scientific Inc
Wrightwood, CA 92397
Apr 10, 2008 Able to withstand temperature from -40 to +125°C, ThermaSeal A(TM) Sealing Film incorporates thick adhesive layer for secure sealing of microplates in PCR and storage applications, such as reagent-handling. Shaped to fit within rim of raised-rim plates for sealing of all wells, polypropylene film can also be used for sealing standard microplates. Each film has 2 removable end tabs that aid in positioning film to plate.

Cotronics Corp.
Brooklyn, NY 11232
Apr 09, 2008 Resistant to electricity, chemicals, and moisture, Duralco(TM) 4463 is 100% solid system that exhibits dimensional stability and adheres to glass, ceramics, metals, and plastics. This 500°F epoxy, suited for bonding and encapsulating applications, contains no VOCs and only requires users to mix and apply.

Master Bond, Inc.
Hackensack, NJ 07601
Apr 08, 2008 Suited for bonding, encapsulation, and coating, 2-component EP21LM-3 develops tensile modulus greater than 100,000 psi and tensile shear strength greater than 2,300 psi. Viscosity of 37,000 cps enables product to flow evenly and smoothly without application of pressure. When cured, polymer has Shore D hardness of 64 and resists thermal cycling as well as water, oil, fuels, and most organic solvents over temperature range of -65 to +250°F.