|
|
Advertisement
|
|
|
HVAC
(Showing headlines 21 - 40) << 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 ...
|
Air Purification System enhances indoor air quality.Steril-Aire, Inc.
Burbank, CA 91504
Oct 27, 2008
Safe, portable, and ozone-free, 13.5 x 15 x 21 in. Steril-Zone(TM) uses 3-stage process to clean air in up to 1,000 ft² rooms. UVC Emitter(TM) technology cleans air of bacteria, mold, and viruses. UV lamp combines with pleated air filter to capture and eliminate particulates, while long-life carbon filter removes VOCs and odors. Operating on standard 120 V, single-phase power, system uses commercial-grade, quiet fan that produces up to 5 air changes per hour.
|
 Temperature Control Valves are self-acting and independent.Anderson, W. E., Div., Dwyer Instruments, Inc.
Grandview, MO 64030
Oct 23, 2008
Requiring no external power sources, Series 38R feature die-cast aluminum housing with fully enclosed bellow assembly and internal over-range protection. Valves, offered in ½-6 in. connection sizes and 1/8-6 in. port sizes, are available with bodies in single-seated, direct or reverse-acting; double-seated, direct or reverse-acting; and 3-way designs with 4 choices of body material. Actuators are available with or without indicating dials or in Fail-Safe versions.
|
 Cabinet Mount Panel Fan features aluminum gravity shutter.Continental Fan Mfg. Inc.
Buffalo, NY 14215
Oct 20, 2008
Including aluminum blades and rear guard, CEB Cabinet Mount Panel Fan offers permanently lubricated drive shaft bearings and ball bearing ODP motor. It features 18 ga galvanized steel housing, 20 ga powder coated venturi, and belt drive capacities to 21,500 cfm. Available in sizes from 24-48 in. with voltage options of 115/230 V 1 phase and 230/460 V 3 phase, unit comes fully assembled and ready to install.
|
 Hybrid Cyclones replace cartridge dust collectors.ProVent, LLC
Harbor Springs, MI 49740
Oct 17, 2008
Offering efficiencies up to 99%, FOURTEX(TM) 4-Vortex Dual Cyclone Dust Collection Systems are made of solid welded, industrial-grade, heavy cold-rolled sheet steel with chemical and corrosion-resistant Durethane DTM coatings. Exhaust gas from first cyclone is fed into inlet of second, providing cumulative effect on removing dust particles. There is no internal filter media to maintain or replace and no sludge, water clean-up, or disposal as with wet type dust collectors.
|
 Vent Panel offers fire-spread safety for electronics chassis.Universal Air Filter Co.
Sauget, IL 62206
Oct 16, 2008
Featuring flame-retardant coating that expands and closes honeycomb cells, PyroCide Vent Panel stops flames from spreading and eliminates air flow to propagate fire. It has more than 95% open area for minimum resistance to air flow within electronics cooling chassis. Suited for telecom and datacom equipment designed to meet Telcordia NEBS standards, RoHS compliant product has ASTM E-84 Class A rating and can be used in ETSI cabinets.
|
Ventilator addresses serious homeland security issues.Allied Healthcare Products, Inc.
Springfield, MO 63110
Oct 16, 2008
Designed for mass casualty incidents, FDA-approved MCV100 features tidal volume settings of 200-1,200 ml and 8-20 breaths/min, oxygen mixing capability, breath-assist function for spontaneous breathing, and audible/visual safety alarms. Device runs on rechargeable battery or regular electric power and can be operated by non-specialists after simple instruction. Using battery, ventilator can run for 21 hr if compressed oxygen is used and 7 hr if compressed oxygen is not available.
|
Circulating Baths operate at -40 to +200°C.PolyScience Div. Of Preston Industries Inc.
Niles, IL 60714 4588
Oct 16, 2008
With 6, 13, or 28 L capacities, Refrigerating/Heating Circulating Baths are offered with choice of controllers. Programmable Controller offers LCD display, ±0.01°C temperature stability, and time/temperature programming, while Advanced Digital Controller has variable-speed pump and RS-232 interface. Featuring 2-speed pump, Standard Digital and Basic Controllers, suited for applications where temperature set points remain relatively static, have stability of ±0.05 and ±0.2°C, respectively.
|
Recirculating Chiller handles process temperature of 41-95°F.PolyScience Div. Of Preston Industries Inc.
Niles, IL 60714 4588
Oct 16, 2008
Durachill(TM) 1.5 hp Chiller provides up to 6,328 W of cooling at 95°F ambient and is available with heater for use with equipment that must be brought up to elevated temperatures before operation can begin. It features microprocessor-based controller, digital temperature display, one-touch set point display, and digital pressure/flowrate display. Other features include user-adjustable fluid temperature, pressure, and flow rate alarms, and high ambient temperature alarm.
|
Refrigerating/Heating Circulator suits external applications.PolyScience Div. Of Preston Industries Inc.
Niles, IL 60714 4588
Oct 13, 2008
With working temperature range of -40 to 200°C, Model 9712 suits applications including control of jacketed reactor vessels and reaction blocks as well as polymerization, polycondensation, and distillation. It features ±0.01°C temperature stability, 13 L reservoir, and variable-speed pressure/suction pump capable of delivering pressure flow rates up to 30 Lpm. Offering data logging capability, programmable controller stores up to 10 different 50-step time/temperature programs.
|
Laboratory Circulator features 1-touch set point selection.PolyScience Div. Of Preston Industries Inc.
Niles, IL 60714 4588
Oct 13, 2008
Suited for general laboratory applications where set points seldom vary, Model 9106 Circulator provides cooling or heating for viscometers, electrophoresis cells, and other lab devices at temperatures from -20 to +150°C. It offers one-touch temperature selection, PID temperature control, and ±0.05°C temperature stability. Requiring less than one sq-ft of bench space, unit features 3 user-programmable temperature presets, 6 L reservoir, and integral 2-speed pump.
|
Immersion Circulator comes with microprocessor controller.PolyScience Div. Of Preston Industries Inc.
Niles, IL 60714 4588
Oct 13, 2008
Model 7306 Immersion Circulator offers ambient temperature range of 5-150°C, ±0.05°C temperature stability, and 3 user-settable temperature presets for setpoint changes. It features integral 2-speed pump for internal as well as external circulation, user-adjustable over-temperature safety, and low-liquid level cutoff. Unit occupies 6½ x 4¾ in. area within bath, and is available for both 120 and 220 V operation.
|
Liquid-to-Liquid Cooling Systems offer quiet operation.PolyScience Div. Of Preston Industries Inc.
Niles, IL 60714 4588
Oct 13, 2008
Suited for heat removal applications where space is at premium, Liquid-to-Liquid Cooling Systems provide up to 100,000 W of cooling and can maintain process temperatures up to 60°C with ±0.5°C stability. They transfer waste heat directly to facility's water supply via high-capacity liquid-to-liquid heat exchanger. Temperature is controlled via microprocessor-based controller that automatically compensates for variations in temperature or flowrate of facility water.
|
Chillers provide up to 114,120 Btu/hr heat removal.PolyScience Div. Of Preston Industries Inc.
Niles, IL 60714 4588
Oct 13, 2008
Portable DURACHILL(TM) Chillers are available with 1½-10 hp compressors and either air- or water-cooled condensers. They come equipped with user-adjustable temperature, pressure, and flow rate alarms as well as automatic condenser pressure cutouts. Models with 1½-3 hp compressors handle process temperatures from 5-35°C, while larger models can handle process temperatures of 0-30°C. Standard features include digital microprocessor temperature control and LED displays.
|
 Compact Fan Heaters are DIN rail mountable.Omega Engineering, Inc.
Stamford, CT 06907
Oct 10, 2008
CE compliant HGL Series fan heaters help to protect failure of electronic components caused by condensation and corrosion by maintaining minimum operating temperatures in enclosures. Applications include electrical and electronic enclosures, display panels, access and parking control systems, and personnel booths.
|
 Wet Rotor Circulators are equipped with 3-speed motors.Bell & Gossett
Morton Grove, IL 60053
Oct 08, 2008
Designed for domestic hot water and closed-loop heating systems, NRF-25 and NBF-25 employ 3-speed switch and motors that promote coverage for range of hydraulic capabilities. Elements of construction include DuraGlide(TM) Bearing System, heat-resistant and non-metallic closed impeller design, as well as self-cleaning particle shield. Covering multiple hydraulic settings, circulators offer flow rates from 24-45 gpm and heads from 19-33 ft. Optional check valve is available for NRF-25.
|
Temperature Sensor offers stability to 1,000°C.Chiral Photonics, Inc
Pine Brook, NJ 07058-9210
Oct 08, 2008
Suited for applications ranging from weld monitoring and control to turbine engine service and design, Helica fiber optic temperature sensor offers accuracy of 1% and sensitivity of 0.01 nm/°C (nominal). It features monolithic glass fiber sensing element that is as stable as silica glass. Standard probe length is 300 mm, while sensor/grating length is 15 mm, and sensor placement is 25 mm from probe tip. Unit utilizes FC/APC type connector.
|
 Single-Stage Compressors feature energy-efficient design.Sullair Corporation
Michigan City, IN 46360
Oct 07, 2008
Sullair 7500 S-energy® Series Compressors with Energy Efficiency System (EES) heat recovery feature low-restriction inlet valve, low pressure drop air-fluid separation system, and high-efficiency fan. Lubricated rotary screw air compressors are available in 100 hp constant-speed and variable-speed drive models with capacities of 369-493 acfm and pressures from 100-175 psig. They include WS Microprocessor Control System and can be monitored and set-up using Windows-based PC.
|
 Immersion Circulator is optimized for footprint, efficiency.Cole-Parmer Instrument Co.
Vernon Hills, IL 60061
Oct 06, 2008
Integrating pumps, cooling systems, and heaters, Polystat® laboratory circulators are designed for optimal heat exchange efficiency, uniformity, and reservoir agitation. Digital, advanced digital, and programmable controllers are available in 6, 13, and 28 L models. Closed laboratory circulator, used for heating/cooling from -10 to +80°C, has sealed design that minimizes fluid evaporation and prevents fluid contamination. It maintains temperature to 0.1°C with flow rates to 12 Lpm.
|
 Temperature Sensor meets JC42.4 JEDEC specification.Catalyst Semiconductor
Sunnyvale, CA 94089
Oct 02, 2008
Model CAT6095 12-bit digital output temperature sensor provides ±1°C temperature sensing accuracy from +75 to +95°C and ±3°C accuracy from -20 to +125°C, across entire supply voltage range of 3.0-3.6 V. Suited for DDR3 memory module applications in high-speed PCs and laptops, environmental control systems, and industrial process control equipment, it is available in space-saving 2 x 3 x 0.55 mm height UDFN as well as standard 2 x 3 x 0.8 mm TDFN package.
|
Blown Film Air Coolers are available in 600-7,500 cfm sizes.Mokon
Buffalo, NY 14207
Oct 02, 2008
Facilitating accurate air ring process control, BFC Series Blown Film Air Coolers eliminate production variables in air ring supply, including air temperature, pressure, and volume. They feature powder coated, heavy gauge steel cabinet designed for 35 in. static pressure, non-corrosive wetted surfaces, permanent cleanable filter, bolt-on adjustable legs, and condensate trap. Units are suited for use in warmer climates or other environments where ambient air temperatures rise during summer.
|
(Showing headlines 21 - 40) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69
|
|
|