AMETEK U.S. Gauge PMT Products
Feasterville, PA 19053
Jul 01, 2008 Under laboratory test conditions, Sta-Kool(TM) 316L SS Cooling Element can reduce 400°F liquid process temperatures to 100°F at active portion of Bourdon tube. Unit has max operating temperature of 750°F at 3,500 psi and max operating pressure of 5,000 psi at 100°F. Element can be threaded or welded to any pressure gauge with ½ in. NPT male connection made from compatible material. It can also be attached in between pressure gauge and diaphragm seal for most comprehensive protection.

Custom Sensors & Technlogies (CST)
Moorpark, CA 93021
Jul 01, 2008 Suited for mobile air conditioning systems, combined pressure & temperature sensor features operating pressure range of 0-150 bar with proof and burst pressure of 210 and 320 bar, respectively. Featuring TiON (Titanium OxyNitride) thin film technology, it has -40 to +180°C operating process media temperature range and -40°C to +135°C ambient operating temperature range. RoHS compliant, rugged, and vibration-resistant unit offers built-in reverse polarity and over-voltage protection.

FUTEK Advanced Sensor Technology, Inc
Irvine, CA 92618
Jun 30, 2008 With resistance to vibration, shock, temperature variations, and RFI, Model PMP300 Pressure Sensor is suited for industrial and OEM pressure measurement applications. Available with ¼ NPT male and amplified 0-10 V 3-wire as standard, customizable units have signal output of 0-10 Vdc, and achieve accuracy of less than or equal to ±0.5% full scale. Stainless steel welded measuring cell eliminates need for soft sealing material that may deteriorate over time.

Strionair Inc
Louisville, CO 80027
Jun 30, 2008 Able to kill over 99% of airborne pathogens and capture allergens such as pollen, dander, and dust, StrionAir System A130 achieves LEED-qualifying MERV 13 efficiency at initial pressure drop of 0.2 in. water gauge. Electrically enhanced filtration technology keeps pressure drop lower through life of filter and also helps extend filter media life. Used for filtration in HVAC systems, product has modular design that can be configured to fit most air handlers.

MEGTEC Systems
De Pere, WI 54115-5030
Jun 30, 2008 Designed for web offset presses, Ironman(TM) Integral Web Cooling Process System eliminates condensate on chill rolls, marking on downstream rollers, and smoke in pressroom. System is available in web widths for 16-96 page presses in single and double-web configurations for printing speeds up to 3,550 fpm. Replacing tilt-box design web guides downstream, L-wrap roller turns horizontal web downwards by 90° angle. Silicone application unit seals both sides of web and increases web moisture.

K&B Duct
Greensboro, NC 27409
Jun 27, 2008 Using expanded metal mesh in cone shape to catch excessive effluent and reduce amount of mist in air stream that reaches the collector, In-line Oil Mist Accumulator catches oils, coolants, and water mists from high-speed machine tools and parts washers. It fits into duct system directly, and has 2-piece construction that allows for easy disassembly and cleaning. Accumulator operates in vertical position, draining collected material back into machine sump.

Elite Thermal Engineering
Bothell, WA 98021
Jun 26, 2008 Functioning in continuous operating temperatures up to 100ºC, single-stage thermoelectric coolers (TECs) are built to withstand temperature cycles in extreme environmental conditions and feature polyurethane seal with hydrolytic stability. Dual-stage TEC module, ETD-8-198, is designed for demanding applications where high delta T as well as high cooling capacity are required. Products suit telecommunication, medical, electrical, CCD camera, and photonics industries.

Greenheck
Schofield, WI 54476 0410
Jun 25, 2008 Available in both belt and direct drive versions, Model QEM is suitable for lower pressure supply or return air handling applications. Unit can be specified with wide range of accessories including inlet guards, protective cages, and isolators. Belt-drive Model QEM is licensed to bear AMCA Seal for sound and air performance.

Millennial Net, Inc.
Burlington, MA 01803
Jun 24, 2008 Retrofitting to existing infrastructures, MeshScape® 6424 Wi-Stat II wirelessly integrates multiple sensors and control actuators to optimize energy consumption and comfort within each zone in commercial and industrial HVAC environments. It utilizes 802.15.4 unlicensed radio band and operates bi-directionally within wireless sensor network for intelligent control action. Connecting to existing HVAC wires for power, system replaces existing analog, digital, and/or pneumatic thermostat.

Kadant Johnson, Inc.
Three Rivers, MI 49093
Jun 19, 2008 Customized to match unique characteristics of steam system, thermocompressor is used to recompress low-pressure steam and discharge steam at higher pressure. Geometric properties minimize consumption of high-pressure motive steam while optimizing flow characteristics. Available in sizes from 1.5-24 in., product helps reduce steam and energy consumption in new installations and can also serve as replacement for existing thermocompressors.

Novaflex Group, The
Richmond Hill L4B 1B7  Canada
Jun 19, 2008 Suited for industrial building construction projects, NovaVent(TM) Sealed venting system features fully-sealed, gasket connection combined with precision-engineered, close-tolerance construction. Eliminating need for field-welded joints, Double Fail Safe(TM) gaskets offer installers safe way to build venting system on-site. Available in 3-24 in. dia, system also features single-wall version that is only metallic venting system that can be cut to length in field.

LG Electronics USA, Inc.
Englewood Cliffs, NJ 07632
Jun 19, 2008 MULTI V(TM) air conditioners uses Variable Refrigerant Flow heat recovery system that makes it possible to operate cooling and heating simultaneously using one outdoor unit. Instead of shutting off once desired temperature is reached, inverter compressor continues to operate at low speed to maintain that temperature; constant speed compressor is utilized only when overall capacity of system needs to be increased. Indoor and outdoor units offer BTU levels from 38,000-192,000.

Kimball Midwest
Columbus, OH 43228
Jun 17, 2008 Capable of eliminating unpleasant odors, including smoke, Neutralizer Metered Mist Air Freshener is concentrated dry spray that will not leave any staining residue. Each aerosol contains 3,800 metered releases for over 40 days of fragrance at 15 min intervals. Suited for use in bathrooms, locker rooms, hospitals, hotels, trucks, and shops, VOC compliant spray is offered in variety of scents.

Gardner Denver
Quincy, IL 62301
Jun 17, 2008 With ability to be configured as air-cooled/water-cooled, VS 80-110 and VS 135-170 Variable Speed series compressors combine Enduro airend with AirSmart control system. They maintain target pressure to ±1 psig and feature Smart Mixing Valve technology that adjusts lubricant injection temperature based on ambient temperature. Models VS 80 and VS 110 provide from 85-558 and 112-719 acfm, respectively, while models VS 135 and VS 170 deliver from 125-862 and 139-1056 acfm, respectively.

Camfil Farr
Riverdale, NJ 07457
Jun 13, 2008 Suited for commercial or institutional environment with large air handling units, Durafil ES filters act as drop-in replacement for any standard V-shaped filter but feature radial inlet and outlet with optimized open area. Use of fine fiber Energy Star media ensures consistent performance throughout service life, and height-to-pleat spacing configuration maximizes active filter area. Also, built-in prefilter spacer section eliminates airflow blockage and resultant high pressure drop.

SCHMIDT Technology GmbH
St. Georgen D-78112  Germany
Jun 12, 2008 Offering measuring range of 0.2-20 m/sec, Model SS 20.60 HT provides digital and analog output and uses status indicator to display information about current flow velocity. Modular design enables sensor to be supplied with field bus interface. Able to measure free air and guided air in ducts from 25-1.000 mm, sensor is suited for mass flow control of combustion processes, burner control, flow measurement of process gases, and volume flow measurement of test stands.

ITW Vortec
Cincinnati, OH 45242-4719
Jun 06, 2008 Only requiring compressed air supply for operation, Vortex A/C(TM) installs on electrical control panels in environments up to 175°F to maintain enclosure temperatures within 80 to 90°F range. UL-listed cooling system, rated at 5,000 BTUH, features dual vortex tube cooling units that each have mechanical thermostat. First stage offers 2,500 BTUH cooling capacity and, if needed, second stage activates to double supply of refrigerated air to enclosure.

AMETEK Technical Industrial Products
Harleysville, PA 19438
Jun 03, 2008 Designed for gas-fired burner systems, Nautilair® 7.6 in. blowers incorporate brushless dc motors for reliable performance in excess of 20,000 hr with minimal maintenance. These pre-mix burner blowers deliver measured air/fuel mixture to optimize combustion as well as reduce N2O and CO emissions. Speed can be adjusted internally via onboard potentiometer or external PWM or dc control that actively varies blower performance, and onboard IntelliGen(TM) controller electronics integrate DSP.

Webster Engineering & Manufacturing Co. LLC
Winfield, KS 67156
May 30, 2008 Designed to sense combustion air temperature, Temp-A-Trim(TM) automatically varies burner fan speed to create constant mass airflow, maintaining optimal combustion efficiency in burner, regardless of combustion air temperature. System requires no special setup or programming. Compatible with linkage and linkage-less controls, Temp-A-Trim minimizes noise levels in boiler rooms as well as need for seasonal tuning of burners.

EXAIR Corporation
Cincinnati, OH 45249-1621
May 29, 2008 Side Mount Kits make mounting of a NEMA 12 Cabinet Cooler possible when electrical enclosure has limited space on top or side. Cabinet Cooler converts compressed air to 20°F without refrigerants or CFCs and circulates air through enclosure to eliminate high temperature malfunction. Cooling capacities up to 5,600 BTU/hr are available. Side Mount Kits maintain NEMA 12 rating of large and small electrical enclosures and models for use on NEMA 4 and 4X enclosures are also available.