Power Supplies can be equipped with 5, 12, or 24 V output.
August 19, 2008 -
With low profile of 2.4 in., model SWS1000L single output ac-dc power supplies feature 4 kVac input to output isolation, low leakage current of less than 300 µA, and operating temperature range of -20°C up to +74°C. Each unit accepts wide input range of 85-265 Vac, and output voltage adjustment range of up to ±20%. Other features include low-temperature start-up capability with 100% load as low as -40°C, temperature-controlled fan, 12 V at 0.1 A auxiliary output, and fan fail alarm.
SAN DIEGO, CA (July 15, 2008) - Lambda has expanded its successful SWS series of single output AC-DC power supplies with the introduction of the medically-approved 1000W units. The new SWS1000L can be supplied with the choice of a 5V, 12V, or a 24V output. The 24V model has a peak output power of 1224W. Lambda will extend this series very soon to offer more output voltage selections between 3.3V and 60V. The SWS1000L models have a 4kVAC input to output isolation and low leakage current (<300µA) while retaining Class B conducted and radiated EMI performance. These high voltage isolation and low leakage specs are requirements of the medical safety standards per EN/UL60601-1; making these supplies ideal for applications such as automated pharmaceutical dispensers, blood analyzers and gene/DNA analysis equipment.
These supplies have a low profile of only 2.4 inches. The operating temperature range is from -20 up to +74°C. In addition, these supplies feature a low-temperature start-up capability with a 100% load, as low as -40°C; making these a reliable choice for systems that experience extremes of temperature such as outdoor-mounted equipment including LED displays/signage, automated toll booths and traffic controls. In addition, these power supplies feature a temperature-controlled fan, which minimizes acoustic noise (up to 8 dBA less than competitive units) under typical operating conditions. This feature makes the SWS1000L ideal for powering indoor systems beyond medical or laboratory equipment, such as automated self-serve kiosks, automatic test (ATE), factory automation and mechatronics.
Each model accepts a wide input range of from 85 to 265VAC, making them compatible with global power standards. The SWS1000L features a wide output voltage adjustment range of up to ±20% to accommodate non-standard system voltages, while an external voltage programming feature (1 to 6V input) enables the supplies to be adjusted remotely from 20% to 120% of its nominal output voltage on most models. This unique feature allows the SWS1000L to be used as an inexpensive bench or laboratory power supply.
Other important features include a 12V@ 0.1A auxiliary output, fan fail alarm, DC output good signal and active current sharing for paralleled connected units. Lambda has included protections for over-voltage, over-current and over-temperature conditions. The SWS1000L series is CE marked and carries UL, CSA, EN60950-1, EN60601-1, UL60601-1 and EN50178 safety approvals and complies with MIL-STD-810F for vibration and shock. All models conform to EN55011-B, EN55022-B and FCC-B for conducted and radiated EMI as well as EN61000-4 immunity and EN61000-3-2 Class A power factor and harmonic distortion specifications.
The SWS1000L series are available now and priced from $460 each in 50-unit quantities.
Lambda Americas is a unit of TDK Corporation (NYSE: TDK) and has been a leading global provider of power solutions for over 60 years. The company designs and manufactures a wide range of AC-DC and DC-DC power products for Industrial, Medical, Telecom, Datacom, and Test and Measurement applications worldwide. Additional information is available at 800-LAMBDA-4 (toll free) or 619-575-4400.
Contacts:
Marketing:
Mel Berman
USA
Phone: 619-628-2859 E-mail this person Company Information: Name: Lambda Americas Address: 3055 Del Sol Blvd. City: San Diego State: CA ZIP: 92154 Country: USA Phone: 619-575-4400 FAX: 619-429-1011 http://www.lambdapower.com
News provided by ThomasNet Industrial Newsroom® (TIN). TIN is a comprehensive source
of new and timely product information in the industrial marketplace. TIN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://news.thomasnet.com/submitpr.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
del.icio.us
DIGG
Facebook
Reddit
StumbleUpon
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
