Condensation Cured Silicone withstands temperatures to 400°F.
June 25, 2008 -
With 2.2 Btu-in./hr/ft²/°F thermal conductivity, Master Sil 150 is 2-part, condensation cured liquid silicone system which can be used for potting and encapsulation. It features Shore A hardness of 40, 230% elongation at break, 11 x 10-4 cm/cm°C thermal expansion, and less than 0.4% linear shrinkage. Able to protect sensitive electronic components/assemblies from dust, moisture, ozone, thermal shock, and vibration, product cures in contact with virtually all types of materials.
Condensation Cured Silicone Available for Potting and Encapsulation to 400°F
Hackensack, NJ. May 28, 2008-A two part, condensation cured liquid silicone system called Master Sil 150 has been developed by Master Bond, Inc., Hackensack, NJ. It can be used for the potting and encapsulation of voltage regulators, high voltage transformers, as well as optical and electronic assemblies. Master Sil 150 has good thermal stability combined with excellent flexibility. It has a Shore A hardness of 40 and its elongation at break is 230%. Low viscosity ensures complete fill-in around complicated parts to provide excellent electrical insulation and resistance to shock. The coefficient of thermal expansion is 11 x 10-4 cm/cm°C and its linear shrinkage is less than 0.4%.
Upon the addition of the curing agent, Master Sil 150 cures at room temperature to a tough, resilient silicone rubber. Its unique mechanical and electrical properties protect sensitive electronic components and assemblies from dust, moisture, ozone, thermal shock and vibration. Master Sil 150 has a service temperature range from -50°C to over 205°C (-55°F - 400°F). Its excellent thermal conductivity, 7.5 x 104 cal/cm.s °C (2.2 BTU-inch/hour-ft²-°F) highly facilitates its use in potting and encapsulation applications. The electrical insulation properties include a volume resistivity of 5 x 1014 ohm cm, a dielectric strength of 18 KV/mm together with a 2.9 dielectric constant and 3 x 10-3 dissipation factor at 1MHz. Master Sil 150 will cure in contact with virtually all types of materials without inhibition.
About Master Bond's Potting and Encapsulation Compounds:
Master Bond's potting and encapsulation materials are designed to protect electronic circuitry and assemblies from potentially damaging conditions such as moisture, various corrosive chemicals, excessive heat, vibration, mechanical impact and thermal shocks Master Bond's rigid and flexible epoxies, polyurethanes and silicone compounds feature outstanding electrical insulation characteristics including high volume resistivity, excellent dielectric strength and dissipation factors.
contact: James Brenner. Phone: 201-343-8983Fax: 201-343-2132E-mail: technical@masterbond.com
154 Hobart Street
Hackensack, New Jersey 07601-3922
Tel: 201-343-8983
Fax: 201-343-2132
Contacts:
Engineering:
James Brenner
USA
Phone: 201-343-8983
FAX: 201-343-2132 E-mail this person Company Information: Name: Master Bond, Inc. Address: 154 Hobart St. City: Hackensack State: NJ ZIP: 07601 Country: USA Phone: 201-343-8983 FAX: 201-343-2132 http://www.masterbond.com
News provided by ThomasNet Industrial Newsroom® (TIN). TIN is a comprehensive source
of new and timely product information in the industrial marketplace. TIN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://news.thomasnet.com/submitpr.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
del.icio.us
DIGG
Facebook
Reddit
StumbleUpon
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
