May 25, 2004 - With maximum rated pressure of 25 psi, Pneuma-Seal® elastomeric bladders come in standard lengths of 6, 9, and 12 in. and measure 1¼ in. wide. Thickness ranges from 5/8 in. (not inflated) to 1 in. (fully inflated), providing 3/8 in. range of motion. Plug-and-play EPDM bladders come unsupported or pre-mounted in protective aluminum housings with 6 in. long flexible hose air connection terminated by 1/8–27 NPT pneumatic fitting.
Archive Press Release
(Products mentioned in this Archive Press Release may or may not be available from the manufacturer.)
Release date: May 21, 2004
Inflatable Bladders in Standard Sizes Simplify Design, Speed Delivery In Host Of OEM, MRO Uses
Pawling Engineered Products has standardized its Pneuma-Seal® line of inflatable elastomeric bladders to simplify the design and fabrication of devices using pneumatic actuators and seals. Marketed under the trade name, Pneuma-Cel, it is believed to be the first line of standard bladders readily available on the web, the “plug and play” EPDM bladders find wide use in mechanical clamping, actuation, sealing, stabilizing and cushioning applications.
Standard lengths of 6, 9 and 12 inches are available on two-day delivery. Width is 1 ¼ inches and uninflated thickness is 5/8 inch. Fully inflated, thickness is 1 inch, providing a 3/8-in. range of motion. All sizes come either unsupported or pre-mounted in protective aluminum housings and with 6-inch long flexible hose air connection terminated by a 1/8-27 NPT pneumatic fitting.
The new Pneuma-Cel standard bladders are based on more than more than ten thousand Pawling custom bladders that have performed successfully in more than a thousand applications since 1955. Many are tandem installations to build up load capacity.
Rated service temperature range is –25 to 250F. Chemical resistance is the same as for EPDM. The new bladders have been life-tested to 500,000 cycles at room temperature.
Unsupported inflatable bladders provide soft, conformal clamping and sealing for applications ranging from workholding to material handling and cargo stabilization. Supported bladders provide “hard” mechanical actuation force, yet compensate for variations in alignment or clearance. Maximum rated pressure is 25psi. They can be held in position with fitted housings or any EPDM-compatible adhesive.
For further information contact Pawling Engineered Products, 157 Charles Coleman Blvd, Pawling, NY 12564, 845 855 1000; 845 855 1139; www.Pneuma-Cel.com.
Contacts:
Public Relations:
Pawling Engineering Products
157 Charles Coleman Boulevard
Pawling NY 12564
USA
Phone: 845-855-1000
FAX: 845-855-1139 E-mail this person Company Information: Name: Pawling Corp. Address: 157 Charles Colman Blvd. City: Pawling State: NY ZIP: 12564 Country: USA Phone: 800-431-0101 FAX: 845-855-1937 http://www.pawling.com/
News provided by ThomasNet Industrial Newsroom® (TIN). TIN is a comprehensive source
of new and timely product information in the industrial marketplace. TIN supplies new product
information to the web sites, e-marketplaces and print publications that serve the
industrial marketplace. For press release submissions please go to
http://www.productnews.com/SubmitPRPage.html.
BY ACCESSING, BROWSING AND/OR USING THIS WEB SITE AND/OR ANY WEB SITES PROVIDED BY
ProductNews.com, YOU AGREE TO BE BOUND BY THE TERMS OF USE
AGREEMENT.
![[Get Copyright Permissions]](http://license.icopyright.net/images/icopy-w.gif){kind=small}
